AIO cell Add-on - Batch Cell PEEK-5.0
Organic solvent compatibility. Perfect add-on for applications where larger sample volume are required (up to 400 µL). Compatible with standard thin-film electrodes and EEP platform.
AIO cell Add-on - Batch Cell PEEK-5.0
Material: PEEK
Electrochemical cell: 5.0 mm Ø
Sample volume: up to 400 µL
Applications: Organic solvents resistance
ED-AIO-ADD-ON-BC-PEEK-5.0
NE-1002X Programmable Microfluidics Single-Syringe Pump
NE-1002X is a fully programmable syringe pump with infusion and withdrawal mode. It can holds 1 syringe up to 60 mL with infusion rates from 0.008 nL/hr to 2545 µL/min. It is also available in two channel version (Model NE-4002X)
NE-1002X Programmable Microfluidics Single-Syringe Pump
Dimensions: 229 x 146 x 114 mm (D x W x H)
Working mode: Infusion/withdrawal
Channels: 1
Motor type: Step motor
Motor step per revolution: 400
Microstepping: 1/16 to 1/2 depending on motor speed
Advance per step: 4.252 nm to 34.018 nm depending on motor speed
Maximum speed: 2.24 mm/min
Minimum speed: 0.014 µm/min
Accuracy: ≤± 0,5 %
Flow rate: 0.007nL/hr to 2505 µL/min
Syringe size: 1 - 60 mL (140 mL partially filled)
Number of program phases: 41
Comm. interface: RS-232 (network up to 100 pumps)
Power supply: Unregulated linear external wall adapter, country and power source specific (or compatible regulated power supply)
Weight: 1.63 Kg
Certificates: CE
NE-1002X
NE-8000 High Pressure Programmable Single Syringe Pump
NE-8000 is a fully programmable stand-alone high pressure syringe pump with infusion and withdrawal mode. It holds 1 syringe up to 140 mLwith infusion rates from 1.733 µL/hr to 340.6 mL/min
Special Application: Continuous Infusion (Push-Pull) and Dual Syringe Pump
Using 2 NE-8000 pumps attached with a cable, one pump will infuse while the other pump refills or have simultaneous infusion.
NE-8000 High Pressure Programmable Single-Syringe Pump
Dimensions: 285 x 155 x 162 mm (L x W x H)
Working mode: Infusion/withdrawal
Channels: 1
Motor type: Step motor
Motor step per revolution: 200
Microstepping: 1/8 to 1/1 depending on motor speed
Advance per step: 0.505 µm to 4.042 µm depending on motor speed
Maximum speed: 300.3 mm/min
Minimum speed: 1.66 µm/min
Accuracy: Within +/- 1% over length of syringe, exclusive of syringe variations
Flow rate: 1.726 µL/hr to 247.40 mL/min
Syringe size: 0.5 µL - 140 mL
Number of program phases: 41
Comm. interface: RS-232 (network up to 100 pumps)
Weight: 3.5 kg
Certificates: CE
NE-8000
NE-4002X Programmable 2 Channel Microfluidics Syringe Pump
NE-4002X is a fully programmable 2 channel syringe pump with infusion and withdrawal mode. It can holds 2 syringe up to 60 mL with infusion rates from 0.007 nL/hr to 1479 µL/min.
NE-4002X Programmable Microfluidics Dual-Channel Syringe Pump
Dimensions: 229 x 146 x 114 mm (D x W x H)
Working mode: Infusion/withdrawal
Channels: 2
Motor type: Step motor
Motor step per revolution: 200
Microstepping: 1/8 to 1/2 depending on motor speed
Advance per step: 0.4252 µm to 1.7009 µm depending on motor speed
Maximum speed: 184 mm/min
Minimum speed: 1.3 µm/min
Accuracy: ≤± 0,5 %
Flow rate: 0.007 nL/hr to 1480 µL/min
Syringe size: 1 - 60 mL (140 mL partially filled)
Number of program phases: 41
Comm. interface: RS-232 (network up to 100 pumps)
Power supply: Unregulated linear external wall adapter, country and power source specific (or compatible regulated power supply)
Weight: 1.63 Kg
Certificates: CE
NE-4002X
High-performance Thick-film Carbon Electrode
High-performance carbon-based screen-printed electrodes for the development of chemical sensors and biosensors. Thick-film sensors fabricated on a flexible and high-resist PET substrate with a classical three-electrodes approach. Ideal to work with microvolume, showing an excellent intra- and inter-electrode precision. Different accessories available.
High-performance Thick-film Carbon Electrode
Dimensions: 27.5 x 10.1 x 0.35 mm
Substrate: PET (white)
Electrodes material: WE: C / RE: Ag / AE: C
WE size: 3 mm Ø (7.1 mm2)
Sample volume: 20 - 50 µL
Applications: Electroanalysis, flow systems, nanotechnology, chemical sensors, biosensors
Contents: 50 units/box
ED-S1PE-C10 (50 units/box)
ECStat Electrochemical Station
USB-powered All-in-One Electrochemical Workstation, including a Bipotentiostat / Galvonostat with built-in Impedance Analyzer, in a very compact and portable equipment. USB interfacing and fully controlled by MicruX EC Manager PC software. More than 25 electroanalytical techniques. Compatible with electrochemical platforms, thick-film and thin-film electrodes.
ECStat Electrochemical Station
Dimensions: 160 x 100 x 45 mm (L x W x H)
Operating modes: bipotentiostat, potentiostat, ZRA, galvanostat, PEIS analyzer
LED indicators: power on, cell on
Comm. interface: USB-C
Power supply: USB
Operating temperature: 0 ºC to +50 ºC
DC-potential range: ± 10 V
Compliance voltage: ± 10 V
DC-potential resolution: 75 µV
Applied potential accuracy: ≤ 0.1% ± 1 mV offset
Current ranges: 100 pA to 10 mA (9 ranges)
Maximun DC current: ± 30 mA
Current accuracy: ≤ 0.1 % (at Full Scale Range)
Measured current resolution: 0.006 % of current range (5 fA on 100 pA range)
EIS - Frequency range: 10 μHz to 1 MHz
EIS - AC-amplitude range: 1 mV to 250 mV rms, or 0.6 V p-p
Housing: Aluminum case
Weight: < 0.5 Kg
Certificates: CE
Details: MicruX ECStat is provided in a plastic briefcase with all the accessories and software for interfacing with the computer and sensors.
ECSTAT
ECStat Electrochemical Station
USB-powered All-in-One Electrochemical Workstation, including a Bipotentiostat / Galvonostat with built-in Impedance Analyzer, in a very compact and portable equipment. USB interfacing and fully controlled by MicruX EC Manager PC software. More than 25 electroanalytical techniques. Compatible with electrochemical platforms, thick-film and thin-film electrodes.
ECStat Electrochemical Station
Dimensions: 160 x 100 x 45 mm (L x W x H)
Operating modes: bipotentiostat, potentiostat, ZRA, galvanostat, PEIS analyzer
LED indicators: power on, cell on
Comm. interface: USB-C
Power supply: USB
Operating temperature: 0 ºC to +50 ºC
DC-potential range: ± 10 V
Compliance voltage: ± 10 V
DC-potential resolution: 75 µV
Applied potential accuracy: ≤ 0.1% ± 1 mV offset
Current ranges: 100 pA to 10 mA (9 ranges)
Maximun DC current: ± 30 mA
Current accuracy: ≤ 0.1 % (at Full Scale Range)
Measured current resolution: 0.006 % of current range (5 fA on 100 pA range)
EIS - Frequency range: 10 μHz to 1 MHz
EIS - AC-amplitude range: 1 mV to 250 mV rms, or 0.6 V p-p
Housing: Aluminum case
Weight: < 0.5 Kg
Certificates: CE
Details: MicruX ECStat is provided in a plastic briefcase with all the accessories and software for interfacing with the computer and sensors.
ECSTAT
All-In-One SPE Platform (1xAdd-on)
AIO-SPE cell with one add-on for using printed electrodes in static or dynamic conditions. Compatible with Flow or Batch add-ons. The cell is also compatible with EEP platform.
All-In-One SPE Platform (1xAdd-on)
Material: Aluminium base + methacrylate add-ons
Dimensions: 60 x 40 x 15/30 mm (W x D x H)
Contents: AIO cell + 1 Add-on (to be chosen) + SPE cable (male or female banana end)
Details: Easy and fast electrode replacement. Different movable add-ons are available. Easy add-ons assembly (tool free). Reusable - long life
ED-AIO-SPE-CELL-1x
All-In-One SPE Platform (2xAdd-ons)
AIO-SPE cell with two add-ons for using printed electrodes in static and dynamic conditions. The cell includes the Flow and Batch add-ons. The cell is also compatible with EEP platform.
All-In-One SPE Platform (2xAdd-ons)
Material: Aluminium base + methacrylate add-ons
Dimensions: 60 x 40 x 15/30 mm (W x D x H)
Contents: AIO cell + 2 Add-ons (Flow and Batch) + SPE cable (male or female banana end)
Details: Easy and fast electrode replacement. Easy add-ons assembly (tool free). Reusable - long life
ED-AIO-SPE-CELL-2x
L100-1E Basic Dual-channel Peristaltic Pump
Compact dual-channel peristaltic pump with small-foot print for saving more space on your benchtop. Speed range is 0.1 - 100 rpm and flow rate range is 0.000166 – 32 mL/min. It is created for transferring, feed, sampling, or filling applications in laboratories and research settings. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
L100-1E Basic Dual-channel Peristaltic Pump
Dimensions: 197 x 110 x 91 mm (L x W x H)
Channels: 2
Flow rate: 0.000166 - 32 mL/min
Speed: 0.1 -100 rpm, CW/CCW
Speed precision: 0.1 rpm
Control mode: Membrane keypad (start/stop, direction and speed)
Display: 3-digit LED display for current speed. 2 LED indicators for running direction
Power off memory: Return to previous state when power on
Prime key: Fast filling and emptying at full speed
Rollers (materials): 10 (stainless steel)
Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm
Max. pressure: 15 psi (1 bar)
Power supply: AC 100-240V, 50/60Hz
Power consumption: 15W
Operating temperature: 0 to 40 ºC
Weight: 2.3 kg (without head)
IP rate: IP31
Certificates: CE
LP-L100-1E/DG-2(10)
L100-1E Basic Single-channel Peristaltic Pump
Compact single-channel peristaltic pump with small-foot print for saving more space on your benchtop. Speed range is 0.1 - 100 rpm and flow rate range is 0.000166 – 32 mL/min. It is created for transferring, feed, sampling, or filling applications in laboratories and research settings. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
L100-1E Basic Single-channel Peristaltic Pump
Dimensions: 197 x 110 x 91 mm (L x W x H)
Channels: 1
Flow rate: 0.000166 - 32 mL/min
Speed: 0.1 -100 rpm, CW/CCW
Speed precision: 0.1 rpm
Control mode: Membrane keypad (start/stop, direction and speed)
Display: 3-digit LED display for current speed. 2 LED indicators for running direction
Power off memory: Return to previous state when power on
Prime key: Fast filling and emptying at full speed
Rollers (materials): 10 (stainless steel)
Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm
Max. pressure: 15 psi (1 bar)
Power supply: AC 100-240V, 50/60Hz
Power consumption: 15W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 2.3 kg (without head)
IP rate: IP31
Certificates: CE
LP-L100-1E/DG-1(10)
L100-1S Standard Single-channel Peristaltic Pump
Standard single-channel peristaltic pump with precise speed control in 0.01 rpm resolution (10000:1 turndown ratio) and flow rate calibration function. The pump has more accurate and wider range of flow rate from 0.15 µL/min to 32 mL/min. Mainly designed for laboratory and light industry applications. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.
L100-1S Standard Single-channel Peristaltic Pump
Dimensions: 232 x 142 x 149 mm (L x W x H)
Working mode: Speed control and flow rate mode
Channels: 1
Flow rate: 0.15 µL/min – 32 mL/min
Comm. interface: RS485. Longer or Modbus protocol
Speed: 0.01 -100 rpm, CW/CCW
Speed precision: 0.01 rpm
Control mode: Membrane keypad, external signal and communication control
Display: LCD
Power off memory: Operating parameters will be saved automatically. The pump status when powered up could be set as stop or as the status before power loss
External control signal: Start/stop, direction and speed control (4-20mA, 0-5V, 0-10V, 0-10kHz external control module optional)
Prime key: Fast filling and emptying at full speed
Rollers (materials): 10 (stainless steel)
Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm
Max. pressure: 15 psi (1 bar)
Power supply: AC 100-240V, 50/60Hz
Power consumption: 25W
Operating temperature: 0 to 40 ºC
Humidity: < 80%
Weight: 2.38 Kg
IP rate: IP31
Certificates: CE
LP-L100-1S/DG-1(10)
128 Products. View all
We ship the products under strict security measures, ensuring their protection...
More information