Shop

HVStat Electrophoresis System

HVStat Electrophoresis System

Automated, portable and miniaturized microfluidic electrophoresis system integrating HV power supply and bipotentiostat. High voltage up to +/- 3kV and DC potential up to +/- 2V. Fully controlled by software. Bluetooth and cable connections available. Compatible with microfluidic chip holder and microchips electrophoresis.

HVStat Electrophoresis System

Dimensions: 165 x 150 x 85 mm (L x W x H)

Interfacing: Serial RS232/ USB Adapter/ wireless (Bluetooth)

LED indicators: power, Bluetooth, cable

Battery power: LiPo - 3300 mAh

HV channels/outputs: 1/4

HV outputs polarity: Positive / negative

HV Output Voltage: ± 3000 V

HV Max. Output Current: 0.34 mA

DC-potential range: ± 2.00 V

DC-potential resolution: 1 mV

DC-offset error: ± 1 mV

Accuracy: < 0.1%

Current ranges: 1 nA to 1 μA (4 ranges)

Maximun DC current: ± 2 μA

Weight: < 0.5 Kg

Certificates: CE

Details: PC software control - MicruX Manager. External cables for interfacing microfluidic chip holder.

HVSTAT

HVStat Electrophoresis System

HVStat Electrophoresis System

Automated, portable and miniaturized microfluidic electrophoresis system integrating HV power supply and bipotentiostat. High voltage up to +/- 3kV and DC potential up to +/- 2V. Fully controlled by software. Bluetooth and cable connections available. Compatible with microfluidic chip holder and microchips electrophoresis.

HVStat Electrophoresis System

Dimensions: 165 x 150 x 85 mm (L x W x H)

Interfacing: Serial RS232/ USB Adapter/ wireless (Bluetooth)

LED indicators: power, Bluetooth, cable

Battery power: LiPo - 3300 mAh

HV channels/outputs: 1/4

HV outputs polarity: Positive / negative

HV Output Voltage: ± 3000 V

HV Max. Output Current: 0.34 mA

DC-potential range: ± 2.00 V

DC-potential resolution: 1 mV

DC-offset error: ± 1 mV

Accuracy: < 0.1%

Current ranges: 1 nA to 1 μA (4 ranges)

Maximun DC current: ± 2 μA

Weight: < 0.5 Kg

Certificates: CE

Details: PC software control - MicruX Manager. External cables for interfacing microfluidic chip holder.

HVSTAT

Microfluidic Chip Holder

Microfluidic Chip Holder

Basic interface for microchips electrophoresis integrating electrode connections for detection and HV as well as wells for buffer solution, sample waste and detection. Compatible with microfluidic electrophoresis chips, HVStat and iHVStat instruments.

Microfluidic Chip Holder

Material: PMMA

Dimensions: 100 x 65 x 15 mm (L x W x H)

Applications: Electrophoretic separations of organic compounds, cations, anions, DNA, peptides, etc.

Contents: Microfluidic Chip Interface

Details: Integrated wells, HV electrodes, 2-mm female bananas. Reusable.

MCE-HOLDER-DC02

Drop-cell connector

Drop-cell Connector

Easy to use interface for thin-film electrodes. Universal cable compatible with any commercial potentiostat included. Long-life platform recommended for stationary electrochemical experiments. 

Drop-cell Connector

Material: Aluminium base + methacrylate cover

Dimensions: 40 x 30 x 25 mm (W x D x H)

Contents: Interface + cable (male or female banana end)

Details: User friendly (tool free assembly) for easy and fast replacement of the electrodes. Reusable - long-life.

ED-DROP-CELL

Multi-electrode Chip Platform

Multi-electrode Chip Platform

The Multi-E Platform provides a simple and robust interface with a multi-potentiostat for using the thin-film multi-electrode chips. Compatible with ED-SE-8x, ED-SE-16x, ED-IDE10-12x and ED-IDE5-12x.

Multi-electrode Chip Platform

Material: Aluminium base + methacrylate cover

Dimensions: 70 x 95 x 25 mm (W x D x H)

Applications: Multiplexing electrochemical analysis

Contents: ME Platform + 2 miniUSB boxes + cables (male or female banana end)

Details: Easy and fast replacement of the chips. Compatible with up to two 18.5x15 mm chips or one 37x15 mm chip. User friendly (tool free assembly). Reusable – long-life.

ED-ME-CELL

2-Channel Peristaltic Pump

2-Channel Peristaltic Pump 

Basic peristaltic pump with 2-channels. Low cost solution with an excellent performance for most lab applications with flow systems. Commonly used in laboratory applications providing flow rates from 0.002 to 30 mL/min. Compatible with AIO Cell, Flow-cell and TL add-ons, and thin-film electrodes.

2-Channel Peristaltic Pump

Dimensions: 232 x 142 x 149 mm (D X W X H)

Channels: 2

Flow rate: 0.002 - 30 mL/min

Speed: 0.1 to 100 rpm, reversible

Speed precision: 0.1 rpm

Control mode: Membrane keypad (start/stop, direction and speed)

Display: 3-digit LED display for current speed. 3 LED indicators for operating state

Power off memory: Return to previous state when power on

Prime key: Fast filling and emptying at full speed

Rollers (materials): 10 (stainless steel)

Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm

Max. pressure: 15 psi (1 bar)

Power supply: AC 90V-260V / 30W

Operating temperature: 0 to 40 ºC

Humidity: < 80%

Weight: 2.3 kg (without head)

Certificates: CE

LP-BT100-2J/DG-2(10)

4-Channel Peristaltic Pump

4-Channel Peristaltic Pump 

Basic peristaltic pump with 4-channels. Low cost solution with an excellent performance for most lab applications with flow systems. Commonly used in laboratory applications providing flow rates from 0.002 to 30 mL/min. Compatible with AIO Cell, Flow-cell and TL add-ons, and thin-film electrodes.

4-Channel Peristaltic Pump

Dimensions: 232 x 142 x 149 mm (D X W X H)

Channels: 4

Flow rate: 0.002 - 30 mL/min

Speed: 0.1 to 100 rpm, reversible

Speed precision: 0.1 rpm

Control mode: Membrane keypad (start/stop, direction and speed)

Display: 3-digit LED display for current speed. 3 LED indicators for operating state

Power off memory: Return to previous state when power on

Prime key: Fast filling and emptying at full speed

Rollers (materials): 10 (stainless steel)

Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm

Max. pressure: 15 psi (1 bar)

Power supply: AC 90V-260V / 30W

Operating temperature: 0 to 40 ºC

Humidity: < 80%

Weight: 2.3 kg (without head)

Certificates: CE

LP-BT100-2J/DG-4(10)

NE-1200 Multi-channel Syringe Pumps

NE-1200 Multi-channel (12) Syringe Pumps

Multi-syringe pump with the same full-featured programmable capabilities as the NE-1000 (up to 12 channels). NE-1200 series allow infusion and withdrawal, and holds 2, 4, 6, 8, 10 or 12 syringes of up to 3 mL each with infusion rates from 0.008 µL/min to 2.0 mL/min.

NE-1200 Multi-channel (12) Syringe Pumps

Dimensions: 260 x 381 x 127 mm (D x W x H)

Working mode: Infusion/withdrawal

Channels: up to 12

Motor type: Step motor

Motor step per revolution: 200

Microstepping: 1/8 to 1/2 depending on motor speed

Advance per step: 0.1323 µm to 0.5292 µm depending on motor speed

Maximum speed: 35 mm/min

Minimum speed: 0.4 µm/min

Linear force: > 700 N at minimum speed, 130 N at maximum speed

Accuracy: Within +/- 1% over length of syringe, exclusive of syringe variations

Flow rate: 8 nL/min - 20 mL/min

Syringe size: 0.5 µL - 140 mL

Number of program phases: 41

Comm. interface: RS-232 (network up to 100 pumps)

Power supply: Unregulated linear external wall adapter, country and power source specific (or compatible regulated power supply)

Weight: 4.6 Kg

Certificates: CE

NE-1200

ME Single-Channel with Platinum Electrodes (50-µm)

ME Single-Channel with Platinum Electrodes (50-µm)

50-µm platinum working electrode and 250-µm reference and auxiliary electrodes. Detection system placed at the outlet of the separation channel with an end-channel approach. Compatible with microfluidic chip holder, HVStat and iHVStat instrument.

ME Single-Channel with Platinum Electrodes (50-µm)

Material: Glass/SU8

Dimensions: 38 x 13 x 0.8 mm (L x W x H)

Injection channel length: 10 mm

Separation channel length: 35 mm

Microchannel geometry: rectangular

Channel width: 50 µm

Channel height: 20 µm

Inlet / outlet: 2 mm Ø

Electrodes material: Ti / Pt

Electrodes thickness: 50/150 nm

Microelectrode width: 50µm

Reference electrode width: 250µm

Auxiliary electrode width: 250µm

Applications: Electrophoretic separations of organic compounds, cations, anions, DNA, peptides, etc.

Contents: from 1 chip

MCE-SU8-Pt001T

ME Single-Channel with Gold Electrodes (50-µm)

ME Single-Channel with Gold Electrodes (50-µm)

50-µm gold working electrode and 250-µm reference and auxiliary electrodes. Detection system placed at the outlet of the separation channel with an end-channel approach. Compatible with microfluidic chip holder, HVStat and iHVStat instrument.

ME Single-Channel with Gold Electrodes (50-µm)

Material: Glass/SU8

Dimensions: 38 x 13 x 0.8 mm (L x W x H)

Injection channel length: 10 mm

Separation channel length: 35 mm

Microchannel geometry: rectangular

Channel width: 50 µm

Channel height: 20 µm

Inlet / outlet: 2 mm Ø

Electrodes material: Ti / Au

Electrodes thickness: 50/150 nm

Microelectrode width: 50µm

Reference electrode width: 250µm

Auxiliary electrode width: 250µm

Applications: Electrophoretic separations of organic compounds, cations, anions, DNA, peptides, etc.

Contents: from 1 chip

MCE-SU8-Au001T

ME Single-Channel with Platinum Electrodes (100-µm)

ME Single-Channel with Platinum Electrodes (100-µm)

100-µm platinum working, reference and auxiliary electrodes. Detection system placed at the outlet of the separation channel with an end-channel approach. Compatible with microfluidic chip holder, HVStat and iHVStat instrument.

ME Single-Channel with Platinum Electrodes (100-µm)

Material: Glass/SU8

Dimensions: 38 x 13 x 0.8 mm (L x W x H)

Injection channel length: 10 mm

Separation channel length: 35 mm

Microchannel geometry: rectangular

Channel width: 50 µm

Channel height: 20 µm

Electrodes material: Ti / Pt

Electrodes thickness: 50/150 nm

Microelectrode width: 100µm

Reference electrode width: 100µm

Auxiliary electrode width: 100µm

Applications: Electrophoretic separations of organic compounds, cations, anions, DNA, peptides, etc.

Contents: from 1 chip

MCE-SU8-Pt002T

ME Single-Channel with Gold Electrodes (100-µm)

ME Single-Channel with Gold Electrodes (100-µm)

100-µm gold working, reference and auxiliary electrodes. Detection system placed at the outlet of the separation channel with an end-channel approach. Compatible with microfluidic chip holder, HVStat and iHVStat instrument.

ME Single-Channel with Gold Electrodes (100-µm)

Material: Glass/SU8

Dimensions: 38 x 13 x 0.8 mm (L x W x H)

Injection channel length: 10 mm

Separation channel length: 35 mm

Microchannel geometry: rectangular

Channel width: 50 µm

Channel height: 20 µm

Inlet / outlet: 2 mm Ø

Electrodes material: Ti / Au

Electrodes thickness: 50/150 nm

Microelectrode width: 100µm

Reference electrode width: 100µm

Auxiliary electrode width: 100µm

Applications: Electrophoretic separations of organic compounds, cations, anions, DNA, peptides, etc.

Contents: from 1 chip

MCE-SU8-Au002T

93 Products. View all

Returns

All the information that you should know about our returns policy...

More information

Contact

Contact us to solve your doubts or answer your questions. We can help you!

More information

Delivery

We ship the products under strict security measures, ensuring their protection...

More information

subscribe to our monthly newsletter