Shop

LSP01-1A Single-channel Syringe Pump

LSP01-3A Single-channel Syringe Pump

Just infusion single-channel syringe pump with 5 µm/min minimum linear speed. The acceptable syringe specification is from 10 μL to 60 mL Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.

LSP01-3A Single-channel Syringe Pump

Dimensions: 280 x 210 x 140 mm (D x W x H)

Working mode: Infusion

Channels: 1

Advance per step: 0.156 µm

Linear force: > 90 N

Accuracy: ≤ ± 0.5% error in the condition of > 30% of max. infusion distance

Flow rate: 0.83 nL/min – 54.2 mL/min

Syringe size: 10 µL – 60 mL

Comm. interface: RS485

Pump stroke: 140 mm

Max. linear rate: 65 mm/min

Min. linear rate: 5 µm/min

State signal output: 2 output signals (OC gate signal) to indicate start/stop and direction

Control signal input: Falling edge or TLL signal to control start/stop

Display: Display volume, flow rate or linear speed (128x64 graphic LCD)

Power off memory: Storing the running parameters automatically

Power supply: AC 90V-260V / 15W

Operating temperature: 0 to 40 ºC

Humidity: < 80%

Weight: 3.6 Kg

Certificates: CE, EMC, ESD ≥ Level IV (IEC 61000-4-2)

LSP01-3A

LSP02-2B Dual-channel Syringe Pump

LSP02-2B Dual-channel Syringe Pump

2-channels syringe pump with infusion/ withdrawal mode. The acceptable syringe specification is from 10 µL to 140 mL. Suitable for high accuracy and small flow rate liquid transferring.

LSP02-2B Dual-channel Syringe Pump

Dimensions: 280 x 250 x 140 mm (D x W x H)

Working mode: Infusion, withdrawal, infusion/withdrawal, withdrawal/infusion, continuous

Channels: 2

Advance per step: 0.156 µm

Linear force: > 180 N

Accuracy: ≤ ± 0.5% error in the condition of > 30% of max. infusion distance

Flow rate: 0.83 nL/min – 150.5 mL/min

Syringe size: 10 µL – 140 mL

Comm. interface: RS485

Pump stroke: 140 mm

Max. linear rate: 130 mm/min

Min. linear rate: 5 µm/min

State signal output: 2 output signals (OC gate signal) to indicate start/stop and direction

Control signal input: Falling edge or TLL signal to control start/stop

Display: Display volume, flow rate or linear speed (128x64 graphic LCD)

Power off memory: Storing the running parameters automatically

Power supply: AC 90V-260V / 20W

Operating temperature: 0 to 40 ºC

Humidity: < 80%

Weight: 4.3 Kg

Certificates: CE, EMC, ESD ≥ Level IV (IEC 61000-4-2)

LSP02-2B

Multi8x All-In-One Platform - Base

Multi8x All-In-One Platform - Base

User-friendly and robust interface between electrodes and instrumentation. Enables the use of microvolume (1–10 μL sample drops) with up to eight standard thin-film (micro)electrodes. Includes the basic assembly parts for the different multi8x add-ons.

Multi8x All-In-One Platform - Base

Material: Aluminium base + methacrylate cover

Dimensions: 120 x 60 x 25 mm (W x D x H)

Contents: Multi8x AIO interface + miniUSB box + cables (male or female banana end)

Details: Easy and fast electrode replacement. For multiplexing analysis up to 8 sensors. Reusable - long life

ED-MULTI8x-AIO-CELL

Multi8x All-In-One Platform - Base

Multi8x All-In-One Platform - Base

User-friendly and robust interface between electrodes and instrumentation. Enables the use of microvolume (1–10 μL sample drops) with up to eight standard thin-film (micro)electrodes. Includes the basic assembly parts for the different multi8x add-ons.

Multi8x All-In-One Platform - Base

Material: Aluminium base + methacrylate cover

Dimensions: 120 x 60 x 25 mm (W x D x H)

Contents: Multi8x AIO interface + miniUSB box + cables (male or female banana end)

Details: Easy and fast electrode replacement. For multiplexing analysis up to 8 sensors. Reusable - long life

ED-MULTI8x-AIO-CELL

Multi8x All-In-One Platform (2xAdd-ons)

Multi8x All-In-One Platform (2xAdd-ons)

AIO multi-drop cell platform with two add-ons for static or dynamic experimental conditions. Compatible with Flow, Batch or Thin-layer Multi8x Add-ons.

Multi8x All-In-One Platform (2xAdd-ons)

Material: Aluminium base + methacrylate cover

Dimensions: 120 x 60 x 25 mm (W x D x H)

Contents: Multi8x AIO interface + 2 Multi8x Add-ons (to be chosen) + miniUSB box + cables (male or female banana end)

Details: Easy and fast electrode replacement. Different movable add-ons are available. Add-ons assembly by screws. Reusable - long shelf-life.

ED-MULTI8x-AIO-CELL-2x

Multi8x All-In-One Platform (2xAdd-ons)

Multi8x All-In-One Platform (2xAdd-ons)

AIO multi-drop cell platform with two add-ons for static or dynamic experimental conditions. Compatible with Flow, Batch or Thin-layer Multi8x Add-ons.

Multi8x All-In-One Platform (2xAdd-ons)

Material: Aluminium base + methacrylate cover

Dimensions: 120 x 60 x 25 mm (W x D x H)

Contents: Multi8x AIO interface + 2 Multi8x Add-ons (to be chosen) + miniUSB box + cables (male or female banana end)

Details: Easy and fast electrode replacement. Different movable add-ons are available. Add-ons assembly by screws. Reusable - long shelf-life.

ED-MULTI8x-AIO-CELL-2x

Multi8x AIO cell Add-on - Thin-layer PEEK-1.0

Multi8x AIO cell Add-on - Thin-layer PEEK-1.0

Organic solvent compatibility. Thin-layer flow-cell to use microfluidic electrochemical sensors in a flow system. Improves the control of fluids. Better precision with low dead volume and low sample. Compatible with TL-SE and TL-IDA thin-layer microfluidic sensors.

Multi8x AIO cell Add-on - Thin-layer PEEK-1.0

Material: PEEK

Channel volume: 55 nL

Applications: Organic solvents resistance

Contents: 1 x Multi8x TL-PEEK-1,0 Add-on

Details: Add-On assembly by screws. Compatible with TL-SE1, TL-IDA1 & TL-IDA5.

ED-ADD-ON-8x-TL-PEEK-1.0

Multi8x AIO cell Add-on - Thin-layer PEEK-1.0

Multi8x AIO cell Add-on - Thin-layer PEEK-1.0

Organic solvent compatibility. Thin-layer flow-cell to use microfluidic electrochemical sensors in a flow system. Improves the control of fluids. Better precision with low dead volume and low sample. Compatible with TL-SE and TL-IDA thin-layer microfluidic sensors.

Multi8x AIO cell Add-on - Thin-layer PEEK-1.0

Material: PEEK

Channel volume: 55 nL

Applications: Organic solvents resistance

Contents: 1 x Multi8x TL-PEEK-1,0 Add-on

Details: Add-On assembly by screws. Compatible with TL-SE1, TL-IDA1 & TL-IDA5.

ED-ADD-ON-8x-TL-PEEK-1.0

Multi8x AIO cell Add-on - Batch-cell PEEK-5.0

Multi8x AIO cell Add-on - Batch-cell PEEK-5.0

Organic solvent compatibility. Enables the use of up to eight standard thin-film (micro)electrodes in applications where larger sample volume (up to 400 µL per cell) are required. The batch cell add-on features correspond to a column (A→H) of a 96-well microplate. Compatible with SE1, IDA, IDRA, IDE and mSE thin-film electrodes.

Multi8x AIO cell Add-on - Batch-cell PEEK-5.0

Material: PEEK

Electrochemical cell: up to 5 mm Ø

Sample volume: up to 400 µL

Applications: Organic solvents resistance

Contents: 1 x Multi8x BC-PEEK-5,0 Add-on

Details: Add-On assembly by screws. Compatible with ED-SE1, ED-mSE1, ED-IDA1, ED-IDA5, ED-IDA6, ED-IDE1, ED-IDE2, ED-IDE3 & ED-IDRA1.

ED-ADD-ON-8x-BC-PEEK-5.0

Multi8x AIO cell Add-on - Flow-cell PEEK-3.5

Multi8x AIO cell Add-on - Flow-cell PEEK-3.5

Organic solvent compatibility. Wall-jet flow-cell ideal for multi ED detection in FIA, HPLC, CE, etc, systems. Low dead volume and sample requirements. Compatible with IDE thin-film electrodes.

Multi8x AIO cell Add-on - Flow-cell PEEK-3.5

Material: PEEK

Electrochemical cell: 3.5 mm Ø

Applications: Organic solvents resistance

Contents: 1 x Multi8x FC-PEEK-3,5 Add-on

Details: Add-On assembly by screws. Compatible with ED-IDE1, ED-IDE2 & ED-IDE3.

ED-ADD-ON-8x-FC-PEEK-3.5

Multi8x AIO cell Add-on - Flow-cell PEEK-3.5

Multi8x AIO cell Add-on - Flow-cell PEEK-3.5

Organic solvent compatibility. Wall-jet flow-cell ideal for multi ED detection in FIA, HPLC, CE, etc, systems. Low dead volume and sample requirements. Compatible with IDE thin-film electrodes.

Multi8x AIO cell Add-on - Flow-cell PEEK-3.5

Material: PEEK

Electrochemical cell: 3.5 mm Ø

Applications: Organic solvents resistance

Contents: 1 x Multi8x FC-PEEK-3,5 Add-on

Details: Add-On assembly by screws. Compatible with ED-IDE1, ED-IDE2 & ED-IDE3.

ED-ADD-ON-8x-FC-PEEK-3.5

All-In-One Drop Cell - Base

All-In-One Drop Cell - Base

User-friendly and robust interface between electrodes and instrumentation. Enables the use of microvolume (1–10 μL sample drops) with standard (10x6mm) thin-film (micro)electrodes. Includes the basic assembly parts for the different add-ons.

All-In-One Drop Cell - Base

Material: Aluminium base + methacrylate cover

Dimensions: 60 x 40 x 30 mm (W x D x H)

Contents: Interface + cable (male or female banana end)

Details: Easy and fast electrode replacement. Reusable - long life

ED-AIO-CELL

All-In-One Drop Cell - Base

All-In-One Drop Cell - Base

User-friendly and robust interface between electrodes and instrumentation. Enables the use of microvolume (1–10 μL sample drops) with standard (10x6mm) thin-film (micro)electrodes. Includes the basic assembly parts for the different add-ons.

All-In-One Drop Cell - Base

Material: Aluminium base + methacrylate cover

Dimensions: 60 x 40 x 30 mm (W x D x H)

Contents: Interface + cable (male or female banana end)

Details: Easy and fast electrode replacement. Reusable - long life

ED-AIO-CELL

AIO cell Add-on - Flow Cell PEEK-2.0

AIO cell Add-on - Flow Cell PEEK-2.0

Organic solvent compatibility. Wall-jet flow-cell add-on ideal for ED detection in FIA, HPLC, CE, etc, systems. Low dead volume and sample requirements. Compatible with SE1, IDA, IDRA and mSE thin-film electrodes.

AIO cell Add-on - Flow Cell PEEK-2.0

Material: PEEK

Electrochemical cell: 2 mm Ø

Applications: Organic solvents resistance

Contents: 1 x FC-PEEK-2,0 Add-on

Details: The add-on is joined to the base-cell (AIO) by means of magnets. Compatible with ED-SE1, ED-mSE1, ED-IDA1, ED-IDA5, ED-IDA6 & ED-IDRA1.

ED-AIO-ADD-ON-FC-PEEK-2.0

AIO cell Add-on - Flow Cell PEEK-2.0

AIO cell Add-on - Flow Cell PEEK-2.0

Organic solvent compatibility. Wall-jet flow-cell add-on ideal for ED detection in FIA, HPLC, CE, etc, systems. Low dead volume and sample requirements. Compatible with SE1, IDA, IDRA and mSE thin-film electrodes.

AIO cell Add-on - Flow Cell PEEK-2.0

Material: PEEK

Electrochemical cell: 2 mm Ø

Applications: Organic solvents resistance

Contents: 1 x FC-PEEK-2,0 Add-on

Details: The add-on is joined to the base-cell (AIO) by means of magnets. Compatible with ED-SE1, ED-mSE1, ED-IDA1, ED-IDA5, ED-IDA6 & ED-IDRA1.

ED-AIO-ADD-ON-FC-PEEK-2.0

AIO cell Add-on - Flow Cell PMMA-2.0

AIO cell Add-on - Flow Cell PMMA-2.0

Wall-jet flow-cell add-on for standard thin-film (micro)electrodes. Ideal for ED detection in FIA, HPLC, CE, etc, systems. Low dead volume and sample requirements. Compatible with SE1, IDA, IDRA and mSE thin-film electrodes.

AIO cell Add-on - Flow Cell PMMA-2.0

Material: PMMA

Electrochemical cell: 2 mm Ø

Contents: 1 x FC-PMMA-2,0 Add-on

Details: The add-on is joined to the base-cell (AIO) by means of magnets. Compatible with ED-SE1, ED-mSE1, ED-IDA1, ED-IDA5, ED-IDA6 & ED-IDRA1.

ED-AIO-ADD-ON-FC-PMMA-2.0

AIO cell Add-on - Flow Cell PMMA-2.0

AIO cell Add-on - Flow Cell PMMA-2.0

Wall-jet flow-cell add-on for standard thin-film (micro)electrodes. Ideal for ED detection in FIA, HPLC, CE, etc, systems. Low dead volume and sample requirements. Compatible with SE1, IDA, IDRA and mSE thin-film electrodes.

AIO cell Add-on - Flow Cell PMMA-2.0

Material: PMMA

Electrochemical cell: 2 mm Ø

Contents: 1 x FC-PMMA-2,0 Add-on

Details: The add-on is joined to the base-cell (AIO) by means of magnets. Compatible with ED-SE1, ED-mSE1, ED-IDA1, ED-IDA5, ED-IDA6 & ED-IDRA1.

ED-AIO-ADD-ON-FC-PMMA-2.0

Multi8x AIO cell Add-on - Flow-cell PEEK-2.0

Multi8x AIO cell Add-on - Flow-cell PEEK-2.0

Organic solvent compatibility. Wall-jet flow-cell ideal for multi ED detection in FIA, HPLC, CE, etc, systems. Low dead volume and sample requirements. Compatible with SE1, IDA, IDRA and mSE thin-film electrodes.

Multi8x AIO cell Add-on - Flow-cell PEEK-2.0

Material: PEEK

Electrochemical cell: 2 mm Ø

Applications: Organic solvents resistance

Contents: 1 x Multi8x FC-PEEK-2,0 Add-on

Details: Add-On assembly by screws. Compatible with ED-SE1, ED-mSE1, ED-IDA1, ED-IDA5, ED-IDA6 & ED-IDRA1.

ED-ADD-ON-8x-FC-PEEK-2.0

Multi8x AIO cell Add-on - Flow-cell PEEK-2.0

Multi8x AIO cell Add-on - Flow-cell PEEK-2.0

Organic solvent compatibility. Wall-jet flow-cell ideal for multi ED detection in FIA, HPLC, CE, etc, systems. Low dead volume and sample requirements. Compatible with SE1, IDA, IDRA and mSE thin-film electrodes.

Multi8x AIO cell Add-on - Flow-cell PEEK-2.0

Material: PEEK

Electrochemical cell: 2 mm Ø

Applications: Organic solvents resistance

Contents: 1 x Multi8x FC-PEEK-2,0 Add-on

Details: Add-On assembly by screws. Compatible with ED-SE1, ED-mSE1, ED-IDA1, ED-IDA5, ED-IDA6 & ED-IDRA1.

ED-ADD-ON-8x-FC-PEEK-2.0

Multi8x AIO cell Add-on - Flow-cell PMMA-2.0

Multi8x AIO cell Add-on - Flow-cell PMMA-2.0

Wall-jet flow-cell ideal for multi ED detection in FIA, HPLC, CE, etc, systems. Low dead volume and sample requirements. Compatible with SE1, IDA, IDRA and mSE thin-film electrodes.

Multi8x AIO cell Add-on - Flow-cell PMMA-2.0

Material: PMMA

Electrochemical cell: 2 mm Ø

Contents: 1 x Multi8x FC-PMMA-2,0 Add-on

Details: Add-On assembly by screws. Compatible with ED-SE1, ED-mSE1, ED-IDA1, ED-IDA5, ED-IDA6 & ED-IDRA1.

ED-ADD-ON-8x-FC-PMMA-2.0

Multi8x AIO cell Add-on - Flow-cell PMMA-2.0

Multi8x AIO cell Add-on - Flow-cell PMMA-2.0

Wall-jet flow-cell ideal for multi ED detection in FIA, HPLC, CE, etc, systems. Low dead volume and sample requirements. Compatible with SE1, IDA, IDRA and mSE thin-film electrodes.

Multi8x AIO cell Add-on - Flow-cell PMMA-2.0

Material: PMMA

Electrochemical cell: 2 mm Ø

Contents: 1 x Multi8x FC-PMMA-2,0 Add-on

Details: Add-On assembly by screws. Compatible with ED-SE1, ED-mSE1, ED-IDA1, ED-IDA5, ED-IDA6 & ED-IDRA1.

ED-ADD-ON-8x-FC-PMMA-2.0

Multi8x AIO cell Add-on - Flow-cell PMMA-3.5

Multi8x AIO cell Add-on - Flow-cell PMMA-3.5

Wall-jet flow-cell ideal for multi ED detection in FIA, HPLC, CE, etc, systems. Low dead volume and sample requirements. Compatible with IDE thin-film electrodes.

Multi8x AIO cell Add-on - Flow-cell PMMA-3.5

Material: PMMA

Electrochemical cell: 3.5 mm Ø

Contents: 1 x Multi8x FC-PMMA-3,5 Add-on

Details: Add-On assembly by screws. Compatible with ED-IDE1, ED-IDE2 & ED-IDE3.

ED-ADD-ON-8x-FC-PMMA-3.5

Multi8x AIO cell Add-on - Flow-cell PMMA-3.5

Multi8x AIO cell Add-on - Flow-cell PMMA-3.5

Wall-jet flow-cell ideal for multi ED detection in FIA, HPLC, CE, etc, systems. Low dead volume and sample requirements. Compatible with IDE thin-film electrodes.

Multi8x AIO cell Add-on - Flow-cell PMMA-3.5

Material: PMMA

Electrochemical cell: 3.5 mm Ø

Contents: 1 x Multi8x FC-PMMA-3,5 Add-on

Details: Add-On assembly by screws. Compatible with ED-IDE1, ED-IDE2 & ED-IDE3.

ED-ADD-ON-8x-FC-PMMA-3.5

Multi8x AIO Cell Add-on - Batch-cell PMMA-5.0

Multi8x AIO cell Add-on - Batch-cell PMMA-5.0

Enables the use of up to eight standard thin-film (micro)electrodes in applications where larger sample volume (up to 400 µL per cell) are required. The batch cell add-on features correspond to a column (A→H) of a 96-well microplate. Compatible with SE1, IDA, IDRA, IDE and mSE thin-film electrodes.

Multi8x AIO cell Add-on - Batch-cell PMMA-5.0

Material: PMMA

Electrochemical cell: up to 5 mm Ø

Sample volume: up to 400 µL

Contents: 1 x Multi8x BC-PMMA-5,0 Add-on

Details: Add-On assembly by screws. Compatible with ED-SE1, ED-mSE1, ED-IDA1, ED-IDA5, ED-IDA6, ED-IDE1, ED-IDE2, ED-IDE3 & ED-IDRA1.

ED-ADD-ON-8x-BC-PMMA-5.0

Multi8x AIO cell Add-on - Thin-layer PMMA-1.0

Multi8x AIO cell Add-on - Thin-layer PMMA-1.0

Thin-layer flow-cell to use microfluidic electrochemical sensors in a flow system. Improves the control of fluids. Better precision with low dead volume and low sample volume. Compatible with TL-SE and TL-IDA thin-layer microfluidic sensors.

Multi8x AIO cell Add-on - Thin-layer PMMA-1.0

Material: PMMA

Channel volume: 55 nL

Contents: 1 x Multi8x TL-PMMA-1,0 Add-on

Details: Add-On assembly by screws. Compatible with TL-SE1, TL-IDA1 & TL-IDA5.

ED-ADD-ON-8x-TL-PMMA-1.0

Multi8x AIO cell Add-on - Thin-layer PMMA-1.0

Multi8x AIO cell Add-on - Thin-layer PMMA-1.0

Thin-layer flow-cell to use microfluidic electrochemical sensors in a flow system. Improves the control of fluids. Better precision with low dead volume and low sample volume. Compatible with TL-SE and TL-IDA thin-layer microfluidic sensors.

Multi8x AIO cell Add-on - Thin-layer PMMA-1.0

Material: PMMA

Channel volume: 55 nL

Contents: 1 x Multi8x TL-PMMA-1,0 Add-on

Details: Add-On assembly by screws. Compatible with TL-SE1, TL-IDA1 & TL-IDA5.

ED-ADD-ON-8x-TL-PMMA-1.0

AIO cell Add-on - Batch Cell PEEK-2.0

AIO cell Add-on - Batch Cell PEEK-2.0

Organic solvent compatibility. Perfect add-on for applications where larger sample volume are required (up to 400 µL). Compatible con las referencias SE1, IDA, IDRA y mSE y la plataforma EEP.

AIO cell Add-on - Batch Cell PEEK-2.0

Material: PEEK

Electrochemical cell: 2 mm Ø

Sample volume: up to 400 µL

Applications: Organic solvents resistance

Contents: 1 x BC-PEEK-2,0 Add-on

Details: The add-on is joined to the base-cell (AIO) by means of magnets. Compatible with ED-SE1, ED-mSE1, ED-IDA1, ED-IDA5, ED-IDA6 & ED-IDRA1.

ED-AIO-ADD-ON-BC-PEEK-2.0

AIO cell Add-on - Batch Cell PMMA-2.0

AIO cell Add-on - Batch Cell PMMA-2.0

Enables the use of the standard thin-film (micro)electrodes in applications where larger sample volumen are required (up to 400 µL). Compatible with SE1, IDA, IDRA and mSE thin-film electrodes and EEP platform.

AIO cell Add-on - Batch Cell PMMA-2.0

Material: PMMA

Electrochemical cell: 2 mm Ø

Sample volume: up to 400 µL

Contents: 1 x BC-PMMA-2,0 Add-on

Details: The add-on is joined to the base-cell (AIO) by means of magnets. Compatible with ED-SE1, ED-mSE1, ED-IDA1, ED-IDA5, ED-IDA6 & ED-IDRA1.

ED-AIO-ADD-ON-BC-PMMA-2.0

AIO cell Add-on - Batch Cell PEEK-3.5

AIO cell Add-on - Batch Cell PEEK-3.5

Organic solvent compatibility. Perfect add-on for applications where larger sample volume are required (up to 400 µL). Compatible with IDE thin-film electrodes and EEP platform.

AIO cell Add-on - Batch Cell PEEK-3.5

Material: PEEK

Electrochemical cell: 3.5 mm Ø

Sample volume: up to 400 µL

Applications: Organic solvents resistance

Contents: 1 x BC-PEEK-3,5 Add-on

Details: The add-on is joined to the base-cell (AIO) by means of magnets. Compatible with ED-IDE1, ED-IDE2 & ED-IDE3.

ED-AIO-ADD-ON-BC-PEEK-3.5

AIO cell Add-on - Flow Cell PEEK-3.5

AIO cell Add-on - Flow Cell PEEK-3.5

Organic solvent compatibility. Wall-jet flow-cell add-on ideal for ED detection in FIA, HPLC, CE, etc, systems. Low dead volume and sample requirements. Compatible con electrodos IDE

AIO cell Add-on - Flow Cell PEEK-3.5

Material: PEEK

Electrochemical cell: 3.5 mm Ø

Applications: Organic solvents resistance

Contents: 1 x FC-PEEK-3,5 Add-on

Details: The add-on is joined to the base-cell (AIO) by means of magnets. Compatible with ED-IDE1, ED-IDE2 & ED-IDE3.

ED-AIO-ADD-ON-FC-PEEK-3.5

AIO cell Add-on - Flow Cell PEEK-3.5

AIO cell Add-on - Flow Cell PEEK-3.5

Organic solvent compatibility. Wall-jet flow-cell add-on ideal for ED detection in FIA, HPLC, CE, etc, systems. Low dead volume and sample requirements. Compatible con electrodos IDE

AIO cell Add-on - Flow Cell PEEK-3.5

Material: PEEK

Electrochemical cell: 3.5 mm Ø

Applications: Organic solvents resistance

Contents: 1 x FC-PEEK-3,5 Add-on

Details: The add-on is joined to the base-cell (AIO) by means of magnets. Compatible with ED-IDE1, ED-IDE2 & ED-IDE3.

ED-AIO-ADD-ON-FC-PEEK-3.5

AIO cell Add-on - Flow Cell PMMA-3.5

AIO cell Add-on - Flow Cell PMMA-3.5

Wall-jet flow-cell add-on for standard thin-film (micro)electrodes. Ideal for ED detection in FIA, HPLC, CE, etc, systems. Low dead volume and sample requirements. Compatible with IDE thin-film electrodes.

AIO cell Add-on - Flow Cell PMMA-3.5

Material: PMMA

Electrochemical cell: 3.5 mm Ø

Contents: 1 x FC-PMMA-3,5 Add-on

Details: The add-on is joined to the base-cell (AIO) by means of magnets. Compatible with ED-IDE1, ED-IDE2 & ED-IDE3.

ED-AIO-ADD-ON-FC-PMMA-3.5

AIO cell Add-on - Flow Cell PMMA-3.5

AIO cell Add-on - Flow Cell PMMA-3.5

Wall-jet flow-cell add-on for standard thin-film (micro)electrodes. Ideal for ED detection in FIA, HPLC, CE, etc, systems. Low dead volume and sample requirements. Compatible with IDE thin-film electrodes.

AIO cell Add-on - Flow Cell PMMA-3.5

Material: PMMA

Electrochemical cell: 3.5 mm Ø

Contents: 1 x FC-PMMA-3,5 Add-on

Details: The add-on is joined to the base-cell (AIO) by means of magnets. Compatible with ED-IDE1, ED-IDE2 & ED-IDE3.

ED-AIO-ADD-ON-FC-PMMA-3.5

AIO cell Add-on - Batch Cell PMMA-3.5

AIO cell Add-on - Batch Cell PMMA-3.5

Enables the use of the standard thin-film (micro)electrodes in applications where larger sample volumes are required (up to 400 µL). Compatible with IDE thin-film electrodes and EEP platform.

AIO cell Add-on - Batch Cell PMMA-3.5

Material: PMMA

Electrochemical cell: 3.5 mm Ø

Sample volume: up to 400 µL

Contents: 1 x BC-PMMA-3,5 Add-on

Details: The add-on is joined to the base-cell (AIO) by means of magnets. Compatible with ED-IDE1, ED-IDE2 & ED-IDE3.

ED-AIO-ADD-ON-BC-PMMA-3.5

AIO cell Add-on PMMA-TL

AIO cell Add-on - Thin Layer PMMA-1.0

Enable the use of microfluidic electrochemical sensors in a thin-layer (TL) based flow approach. Improves the control of fluids. Better precision with low dead volume and low sample volume. Compatible with TL-SE and TL-IDA thin-layer microfluidic sensors.

AIO cell Add-on - Thin Layer PMMA-1.0

Material: PMMA

Channel volume: 55 nL

Contents: 1 x TL-PMMA-1,0 Add-on

Details: The add-on is joined to the base-cell (AIO) by means of magnets. Compatible with TL-SE1, TL-IDA1 & TL-IDA5.

ED-AIO-ADD-ON-TL-PMMA-1.0

AIO cell Add-on PMMA-TL

AIO cell Add-on - Thin Layer PMMA-1.0

Enable the use of microfluidic electrochemical sensors in a thin-layer (TL) based flow approach. Improves the control of fluids. Better precision with low dead volume and low sample volume. Compatible with TL-SE and TL-IDA thin-layer microfluidic sensors.

AIO cell Add-on - Thin Layer PMMA-1.0

Material: PMMA

Channel volume: 55 nL

Contents: 1 x TL-PMMA-1,0 Add-on

Details: The add-on is joined to the base-cell (AIO) by means of magnets. Compatible with TL-SE1, TL-IDA1 & TL-IDA5.

ED-AIO-ADD-ON-TL-PMMA-1.0

Reference Electrode - Ag/AgCl

Reference Electrode - Ag/AgCl

Silver/Silver Chloride reference electrode provides an highly stable potential along the electrochemical experiments. Compatible with AIO cell, Batch-cell Add-ons and EEP platform.

Reference Electrode - Ag/AgCl

Material: Electrode body is made of high resistance PP (polypropylene).

Dimensions: 50 mm length

Electrodes material: Ag/AgCl wire (1 mm Ø)

Applications: External reference electrode

Contents: 1 x Ag/AgCl electrode

Details: Ag/AgCl reference electrode is provided in a vial with a 3M KCl solution.

RE-Ag/AgCl

Auxiliary/Counter Electrode - Stainless Steel

Auxiliary/Counter Electrode - Stainless Steel

Counter electrode made in an inexpensive material. Stainless-steel electrode keeps a good robustness with a lower cost. Compatible with AIO cell, Batch-cell Add-ons and EEP platform.

Auxiliary/Counter Electrode - Stainless Steel

Dimensions: 50 mm lenght

Electrodes material: SS tube (1.6 mm Ø)

Applications: External SS counter electrode

Contents: 1 x Stainless Steel electrode

CE-SS

Auxiliary/Counter Electrode - Platinum

Auxiliary/Counter Electrode - Platinum

Counter electrode made with highly inert material. Useful for high current measurements or in case the electrode is not integrated on-chip. Compatible with AIO cell, Batch-cell Add-ons and EEP platform.

Auxiliary/Counter Electrode - Platinum

Dimensions: 50 mm length

Electrodes material: Pt wire (0.3 mm Ø)

Applications: External Pt counter electrode

Contents: 1 x Platinum electrode

CE-PT

Multi8x All-In-One Platform (1xAdd-on)

Multi8x All-In-One Platform (1xAdd-on)

AIO multi-drop cell platform with one add-on for static or dynamic experimental conditions. Compatible with Flow, Batch or Thin-layer Multi8x Add-ons. 

Multi8x All-In-One Platform (1xAdd-on)

Material: Aluminium base + methacrylate cover

Dimensions: 120 x 60 x 25 mm (W x D x H)

Contents: Multi8x AIO interface + 1 Multi8x Add-on (to be chosen) + miniUSB box + cables (male or female banana end)

Details: Easy and fast electrode replacement. Different movable add-ons are available. Add-ons assembly by screws. Reusable - long shelf-life

ED-MULTI8x-AIO-CELL-1x

Multi8x All-In-One Platform (1xAdd-on)

Multi8x All-In-One Platform (1xAdd-on)

AIO multi-drop cell platform with one add-on for static or dynamic experimental conditions. Compatible with Flow, Batch or Thin-layer Multi8x Add-ons. 

Multi8x All-In-One Platform (1xAdd-on)

Material: Aluminium base + methacrylate cover

Dimensions: 120 x 60 x 25 mm (W x D x H)

Contents: Multi8x AIO interface + 1 Multi8x Add-on (to be chosen) + miniUSB box + cables (male or female banana end)

Details: Easy and fast electrode replacement. Different movable add-ons are available. Add-ons assembly by screws. Reusable - long shelf-life

ED-MULTI8x-AIO-CELL-1x

Extenal Electrode Platform

Extenal Electrode Platform (EEP)

EEP platform enables the use of external electrodes in the AIO cell in static conditions with the batch-cell add-ons. Compatible with AIO cell, Batch-cell Add-ons, RE-Ag/AgCl, CE-Pt and CE-SS.

Extenal Electrode Platform (EEP)

Material: PLA

Dimensions: 70 x 65 x 35 mm (W x D x H)

Applications: Placement of external electrodes

Contents: EEP AIO base + 2 Arms for external electrodes

Details: Easy AIO-cell fitting. Easy and Fast arm positioning. External electrodes are always placed in the same position.

EEP-AIO-CELL

Fitting System Pack

Flow System - Fitting Pack

The fitting pack includes:

  • Fitting  nuts (1/4" - 28 UNF - 1/16" OD tubing) - 5 units
  • Ferrules PTFE/SS (1/4" - 28 UNF - 1/16" OD tubing) - 5 units

Flow System - Fitting Pack

Contents: Fitting nuts + ferrules

Details: Other pack options are available under request.

FIT-PACK

All-In-One Platform (2xAdd-ons)

All-In-One Platform (2xAdd-ons)

AIO drop cell base with two add-on for static or dynamic experimental conditions. Compatible with Flow, Batch or Thin-layer add-on. The cell is compatible with EEP platform. 

All-In-One Platform (2xAdd-ons)

Material: Aluminium base + methacrylate cover

Dimensions: 60 x 40 x 30 mm (W x D x H)

Contents: AIO Drop Cell + 2 Add-ons (to be chosen) + cable (male or female banana end)

Details: Easy and fast electrode replacement. Different movable add-ons are available. Easy add-ons assembly (tool free). Reusable - long life

ED-AIO-CELL-2x

All-In-One Platform (2xAdd-ons)

All-In-One Platform (2xAdd-ons)

AIO drop cell base with two add-on for static or dynamic experimental conditions. Compatible with Flow, Batch or Thin-layer add-on. The cell is compatible with EEP platform. 

All-In-One Platform (2xAdd-ons)

Material: Aluminium base + methacrylate cover

Dimensions: 60 x 40 x 30 mm (W x D x H)

Contents: AIO Drop Cell + 2 Add-ons (to be chosen) + cable (male or female banana end)

Details: Easy and fast electrode replacement. Different movable add-ons are available. Easy add-ons assembly (tool free). Reusable - long life

ED-AIO-CELL-2x

All-In-One Platform (1xAdd-on)

All-In-One Platform (1xAdd-on)

AIO drop cell base with one add-on for static or dynamic experimental conditions. Compatible with Flow, Batch or Thin-layer add-ons. The cell is also compatible with EEP platform.

All-In-One Platform (1xAdd-on)

Material: Aluminium base + methacrylate cover

Dimensions: 60 x 40 x 30 mm (W x D x H)

Contents: AIO Drop Cell + 1 Add-on (to be chosen) + cable (male or female banana end)

Details: Easy and fast electrode replacement. Different movable add-ons are available. Easy add-ons assembly (tool free). Reusable - long life

ED-AIO-CELL-1x

All-In-One Platform (1xAdd-on)

All-In-One Platform (1xAdd-on)

AIO drop cell base with one add-on for static or dynamic experimental conditions. Compatible with Flow, Batch or Thin-layer add-ons. The cell is also compatible with EEP platform.

All-In-One Platform (1xAdd-on)

Material: Aluminium base + methacrylate cover

Dimensions: 60 x 40 x 30 mm (W x D x H)

Contents: AIO Drop Cell + 1 Add-on (to be chosen) + cable (male or female banana end)

Details: Easy and fast electrode replacement. Different movable add-ons are available. Easy add-ons assembly (tool free). Reusable - long life

ED-AIO-CELL-1x

AIO cell Add-on - Thin Layer PEEK-1.0

AIO cell Add-on - Thin Layer PEEK-1.0

Organic solvent compatibility. Enable the use of microfluidic electrochemical sensors in a thin-layer (TL) based flow approach. Improves the control of fluids. Better precision with low dead volume and low sample volume. Compatible with TL-SE and TL-IDA thin-layer microfluidic sensors.

AIO cell Add-on - Thin Layer PEEK-1.0

Material: PEEK

Channel volume: 55 nL

Applications: Organic solvents resistance

Contents: 1 x TL-PEEK-1,0 Add-on

Details: The add-on is joined to the base-cell (AIO) by means of magnets. ompatible with TL-SE1, TL-IDA1 & TL-IDA5.

ED-AIO-ADD-ON-TL-PEEK-1.0

AIO cell Add-on - Thin Layer PEEK-1.0

AIO cell Add-on - Thin Layer PEEK-1.0

Organic solvent compatibility. Enable the use of microfluidic electrochemical sensors in a thin-layer (TL) based flow approach. Improves the control of fluids. Better precision with low dead volume and low sample volume. Compatible with TL-SE and TL-IDA thin-layer microfluidic sensors.

AIO cell Add-on - Thin Layer PEEK-1.0

Material: PEEK

Channel volume: 55 nL

Applications: Organic solvents resistance

Contents: 1 x TL-PEEK-1,0 Add-on

Details: The add-on is joined to the base-cell (AIO) by means of magnets. ompatible with TL-SE1, TL-IDA1 & TL-IDA5.

ED-AIO-ADD-ON-TL-PEEK-1.0

MES Based Buffer Solution

MES Based Buffer Solution

Buffer substance provided as single dose specially developed to carry out electrophoresis separations in microfluidic devices with electrochemical detection. Buffer is available in different pH between 5.0 and 7.0.

MES Based Buffer Solution

Contents: 10 x Single Bottle - Buffer Substance

Details: The buffer substance should be diluted in distilled water to get the final concentration/pH.

MXF-MES

LSP01-2A Single-channel Syringe Pump

LSP01-2A Single-channel Syringe Pump

Just infusion high-precision single-channel syringe pump with 1 µm/min minimum linear speed. The acceptable syringe specification is from 10 μL to 60 mL. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.

LSP01-2A Single-channel Syringe Pump

Dimensions: 280 x 210 x 140 mm (D x W x H)

Working mode: Infusion

Channels: 1

Advance per step: 0.031 µm

Linear force: > 90 N

Accuracy: ≤ ± 0.5% error in the condition of > 30% of max. infusion distance

Flow rate: 0.16 nL/min – 10.8 mL/min

Syringe size: 10 µL – 60 mL

Comm. interface: RS485

Pump stroke: 140 mm

Max. linear rate: 13 mm/min

Min. linear rate: 1 µm/min

State signal output: 2 output signals (OC gate signal) to indicate start/stop and direction

Control signal input: Falling edge or TLL signal to control start/stop

Display: Display volume, flow rate or linear speed (128x64 graphic LCD)

Power off memory: Storing the running parameters automatically

Power supply: AC 90V-260V / 15W

Operating temperature: 0 to 40 ºC

Humidity: < 80%

Weight: 3.6 Kg

Certificates: CE

LSP01-2A

TJ-3A Single-channel Syringe Pump

TJ-3A Single-channel Syringe Pump

Infusion/withdrawal single-channel syringe pump. The acceptable syringe specifications are from 10 µL to 60 mL. Suitable for high accuracy and small flow rate liquid transferring.

TJ-3A Single-channel Syringe Pump

Dimensions: 170 x 108 x 70 mm / 245 x 100 x 95 mm (controller / drive unit) (D X W X H)

Working mode: Infusion, withdrawal, infusion/withdrawal, withdrawal/infusion, continuous

Channels: 1

Advance per step: 0.165 µm

Linear force: > 90 N

Accuracy: ≤ ± 0.5% error in the condition of > 30% of max. infusion distance

Flow rate: 0.139 µL/min – 52.9 mL/min

Syringe size: 1 - 60 mL

Comm. interface: RS485

Pump stroke: 90 mm

Max. linear rate: 79.4 mm/min

Min. linear rate: 7.9 µm/min

State signal output: 2 output signals (OC gate signal) to indicate start/stop and direction

Control signal input: Falling edge or TLL signal to control start/stop

Display: Display volume, flow rate or linear speed (128x64 graphic LCD)

Power off memory: Storing the running parameters automatically

Power supply: AC 90V-260V / 10W

Operating temperature: 0 to 40 ºC

Humidity: < 80%

Weight: 0.8 Kg (controller) 1.3 Kg (drive unit)

Certificates: CE

TJ-3A/W0109-1B

Basic Pack

Flow System - Basic Pack

The basic pack includes:

  • Fitting  nuts (1/4" - 28 UNF - 1/16" OD tubing) - 5 units
  • Ferrules PTFE/SS (1/4" - 28 UNF - 1/16" OD tubing) - 5 units
  • PTFE tubing (OD: 1,6mm - 1/16" - ID: 0,8 mm) - 1 m
  • Plastic syringes (10 mL) - 5 units
  • Disposable scalpel - 1 unit

Flow System - Basic Pack

Contents: Fitting nuts + ferrules + tubing + syringes + scalpel

Details: Other pack options are available under request.

B-PACK

Basic-Plus Pack

Flow System - Basic-Plus Pack

The plus-pack includes:

  • Fitting  nuts (1/4" - 28 UNF - 1/16" OD tubing) - 5 units
  • Ferrules PTFE/SS (1/4" - 28 UNF - 1/16" OD tubing) - 5 units
  • PTFE tubing (OD: 1,6mm - 1/16" - ID: 0,8 mm) - 1 m
  • Glass reservoir (GL32 thread - 50 mL)  with standard cap - 2 units
  • Bottle cap (GL32 thread/ 2 x Luer ports) - 2 units
  • Plastic syringes (10 mL) - 5 units
  • Disposable scalpel - 1 unit

Flow System - Basic-Plus Pack

Contents: Fitting nuts + ferrules + tubing + reservoirs + syringes + scalpel

Details: Other pack options are available under request.

B-PACK+

High Voltage Cable

High Voltage Cable

Compatible with MicruX® HVStat and microfluidic chip holder to connect the high voltage electrodes.

High Voltage Cable

Dimensions: 50 cm long

Contents: 1 x HV cable

Details: Accessory for MicruX® HVStat electrophoresis system.

MXF-HVCAB

Bipotentiostat cable

Bipotentiostat Cable

Compatible with MicruX® HVStat and microfluidic chip holder to connect the electrodes of detection system.

Bipotentiostat Cable

Dimensions: 50 cm long

Contents: 1 x bipot cable

Details: Accessory for MicruX® HVStat electrophoresis system.

MXF-BIPOTCAB

Standalone Desktop LCD Digital Microscope

Standalone Desktop LCD Digital Microscope

Up to 1200x magnified and LED Illuminated viewing. Perfect complement for a wide range of applications such as inspection of electronics, microfluidic channels, electrodes, etc. Compatible with PC, MAC and iPad.

Standalone Desktop LCD Digital Microscope

Dimensions: 22.9 x 15.2 x 15.2 cm

Image sensor: 5 MegaPixel (up to 12M by interpolation)

Controller: High speed DSP

Flicker rate: 50Hz/60Hz

Focus range: Manual focus from 10mm to 30mm

Light source: 8 LEDS with adjustable brightness

Digital magnification: Up to 1200x

Optical magnification: 10x to 300x

Battery power: Rechargeable 1050 mAh Li-ion Battery

Working time: 2 hours

Charge time: 3 hours

Software compatibility: Windows XP SP2/Vista/7/8/10 and Mac 10.6-10.8

Video format: AVI

Video capture resolution: VGA, QVGA - 30 fps

Software languages: English, German, French, Spanish, Russian, Italian, Portuguese, Dutch, Polish, Japanese, Korean, Chinese

On screen display languages: English, German, French, Spanish, Italian, Portuguese, Dutch, Japanese, Chinese Simplified, Chinese Traditional

LCD screen: 3.5" LCD screen, 4:3 ratio, resolution 320x240 pixels

microSD card capacity: Up to 32GB microSDHC

TV output: Yes

Weight: 0.9 Kg

Certificates: CE, FCC approval, RoHS compliance

SDM-1200x-LCD

Full System Pack

Flow System - Full Pack

The full-pack contains all the accesories for using using MicruX’ thin-film (micro)electrodes in flow systems with All-in-One platform. This pack includes:

  • AIO-CELL-1x + 25 standard electrodes.
  • Peristaltic pump and injection valve.
  • Fittings, ferrules and tubing.
  • Glass reservoir and other material.

Flow System - Full Pack

Contents: AIO Cell + 1 Add-on + 25 standard thin-film electrodes + fitting system + reservoir + other accessories

Details: Other pack options; with different peristaltic or syringe pumps, accessories…, are also available on demand. Packs might be customized taking into account the specific requirements of customers.

F-PACK-AIO

iHVStat Electrophoresis System

iHVStat Electrophoresis System

Integrated, automated, portable and miniaturized microfluidic electrophoresis system integrating HV power supply and bipotentiostat. High voltage up to +/- 3kV and DC potential up to +/- 2V. Fully controlled by software. Bluetooth and cable connections available. Compatible with microfluidic chip holder and microchips electrophoresis.

iHVStat Electrophoresis System

Dimensions: 165 x 150 x 95 mm (L x W x H)

Interfacing: Serial RS232/ USB Adapter/ wireless (Bluetooth)

LED indicators: power, Bluetooth, cable

Battery power: LiPo - 3300 mAh

HV channels/outputs: 1/4

HV outputs polarity: Positive / negative

HV Output Voltage: ± 3000 V

HV Max. Output Current: 0.34 mA

DC-potential range: ± 2.00 V

DC-potential resolution: 1 mV

DC-offset error: ± 1 mV

Accuracy: < 0.1%

Current ranges: 1 nA to 1 μA (4 ranges)

Maximun DC current: ± 2 μA

Weight: < 0.5 Kg

Certificates: CE

Details: PC software control - MicruX Manager. Integrated interface for microfluidic chip holder. Cabeless.

iHVSTAT

iHVStat Electrophoresis System

iHVStat Electrophoresis System

Integrated, automated, portable and miniaturized microfluidic electrophoresis system integrating HV power supply and bipotentiostat. High voltage up to +/- 3kV and DC potential up to +/- 2V. Fully controlled by software. Bluetooth and cable connections available. Compatible with microfluidic chip holder and microchips electrophoresis.

iHVStat Electrophoresis System

Dimensions: 165 x 150 x 95 mm (L x W x H)

Interfacing: Serial RS232/ USB Adapter/ wireless (Bluetooth)

LED indicators: power, Bluetooth, cable

Battery power: LiPo - 3300 mAh

HV channels/outputs: 1/4

HV outputs polarity: Positive / negative

HV Output Voltage: ± 3000 V

HV Max. Output Current: 0.34 mA

DC-potential range: ± 2.00 V

DC-potential resolution: 1 mV

DC-offset error: ± 1 mV

Accuracy: < 0.1%

Current ranges: 1 nA to 1 μA (4 ranges)

Maximun DC current: ± 2 μA

Weight: < 0.5 Kg

Certificates: CE

Details: PC software control - MicruX Manager. Integrated interface for microfluidic chip holder. Cabeless.

iHVSTAT

HVStat Electrophoresis System

HVStat Electrophoresis System

Automated, portable and miniaturized microfluidic electrophoresis system integrating HV power supply and bipotentiostat. High voltage up to +/- 3kV and DC potential up to +/- 2V. Fully controlled by software. Bluetooth and cable connections available. Compatible with microfluidic chip holder and microchips electrophoresis.

HVStat Electrophoresis System

Dimensions: 165 x 150 x 85 mm (L x W x H)

Interfacing: Serial RS232/ USB Adapter/ wireless (Bluetooth)

LED indicators: power, Bluetooth, cable

Battery power: LiPo - 3300 mAh

HV channels/outputs: 1/4

HV outputs polarity: Positive / negative

HV Output Voltage: ± 3000 V

HV Max. Output Current: 0.34 mA

DC-potential range: ± 2.00 V

DC-potential resolution: 1 mV

DC-offset error: ± 1 mV

Accuracy: < 0.1%

Current ranges: 1 nA to 1 μA (4 ranges)

Maximun DC current: ± 2 μA

Weight: < 0.5 Kg

Certificates: CE

Details: PC software control - MicruX Manager. External cables for interfacing microfluidic chip holder.

HVSTAT

HVStat Electrophoresis System

HVStat Electrophoresis System

Automated, portable and miniaturized microfluidic electrophoresis system integrating HV power supply and bipotentiostat. High voltage up to +/- 3kV and DC potential up to +/- 2V. Fully controlled by software. Bluetooth and cable connections available. Compatible with microfluidic chip holder and microchips electrophoresis.

HVStat Electrophoresis System

Dimensions: 165 x 150 x 85 mm (L x W x H)

Interfacing: Serial RS232/ USB Adapter/ wireless (Bluetooth)

LED indicators: power, Bluetooth, cable

Battery power: LiPo - 3300 mAh

HV channels/outputs: 1/4

HV outputs polarity: Positive / negative

HV Output Voltage: ± 3000 V

HV Max. Output Current: 0.34 mA

DC-potential range: ± 2.00 V

DC-potential resolution: 1 mV

DC-offset error: ± 1 mV

Accuracy: < 0.1%

Current ranges: 1 nA to 1 μA (4 ranges)

Maximun DC current: ± 2 μA

Weight: < 0.5 Kg

Certificates: CE

Details: PC software control - MicruX Manager. External cables for interfacing microfluidic chip holder.

HVSTAT

Microfluidic Chip Holder

Microfluidic Chip Holder

Basic interface for microchips electrophoresis integrating electrode connections for detection and HV as well as wells for buffer solution, sample waste and detection. Compatible with microfluidic electrophoresis chips, HVStat and iHVStat instruments.

Microfluidic Chip Holder

Material: PMMA

Dimensions: 100 x 65 x 15 mm (L x W x H)

Applications: Electrophoretic separations of organic compounds, cations, anions, DNA, peptides, etc.

Contents: Microfluidic Chip Interface

Details: Integrated wells, HV electrodes, 2-mm female bananas. Reusable.

MCE-HOLDER-DC02

Drop-cell connector

Drop-cell Connector

Easy to use interface for thin-film electrodes. Universal cable compatible with any commercial potentiostat included. Long-life platform recommended for stationary electrochemical experiments. 

Drop-cell Connector

Material: Aluminium base + methacrylate cover

Dimensions: 40 x 30 x 25 mm (W x D x H)

Contents: Interface + cable (male or female banana end)

Details: User friendly (tool free assembly) for easy and fast replacement of the electrodes. Reusable - long-life.

ED-DROP-CELL

Multi-electrode Chip Platform

Multi-electrode Chip Platform

The Multi-E Platform provides a simple and robust interface with a multi-potentiostat for using the thin-film multi-electrode chips. Compatible with ED-SE-8x, ED-SE-16x, ED-IDE10-12x and ED-IDE5-12x.

Multi-electrode Chip Platform

Material: Aluminium base + methacrylate cover

Dimensions: 70 x 95 x 25 mm (W x D x H)

Applications: Multiplexing electrochemical analysis

Contents: ME Platform + 2 miniUSB boxes + cables (male or female banana end)

Details: Easy and fast replacement of the chips. Compatible with up to two 18.5x15 mm chips or one 37x15 mm chip. User friendly (tool free assembly). Reusable – long-life.

ED-ME-CELL

2-Channel Peristaltic Pump

2-Channel Peristaltic Pump 

Basic peristaltic pump with 2-channels. Low cost solution with an excellent performance for most lab applications with flow systems. Commonly used in laboratory applications providing flow rates from 0.002 to 30 mL/min. Compatible with AIO Cell, Flow-cell and TL add-ons, and thin-film electrodes.

2-Channel Peristaltic Pump

Dimensions: 232 x 142 x 149 mm (D X W X H)

Channels: 2

Flow rate: 0.002 - 30 mL/min

Speed: 0.1 to 100 rpm, reversible

Speed precision: 0.1 rpm

Control mode: Membrane keypad (start/stop, direction and speed)

Display: 3-digit LED display for current speed. 3 LED indicators for operating state

Power off memory: Return to previous state when power on

Prime key: Fast filling and emptying at full speed

Rollers (materials): 10 (stainless steel)

Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm

Max. pressure: 15 psi (1 bar)

Power supply: AC 90V-260V / 30W

Operating temperature: 0 to 40 ºC

Humidity: < 80%

Weight: 2.3 kg (without head)

Certificates: CE

LP-BT100-2J/DG-2(10)

4-Channel Peristaltic Pump

4-Channel Peristaltic Pump 

Basic peristaltic pump with 4-channels. Low cost solution with an excellent performance for most lab applications with flow systems. Commonly used in laboratory applications providing flow rates from 0.002 to 30 mL/min. Compatible with AIO Cell, Flow-cell and TL add-ons, and thin-film electrodes.

4-Channel Peristaltic Pump

Dimensions: 232 x 142 x 149 mm (D X W X H)

Channels: 4

Flow rate: 0.002 - 30 mL/min

Speed: 0.1 to 100 rpm, reversible

Speed precision: 0.1 rpm

Control mode: Membrane keypad (start/stop, direction and speed)

Display: 3-digit LED display for current speed. 3 LED indicators for operating state

Power off memory: Return to previous state when power on

Prime key: Fast filling and emptying at full speed

Rollers (materials): 10 (stainless steel)

Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm

Max. pressure: 15 psi (1 bar)

Power supply: AC 90V-260V / 30W

Operating temperature: 0 to 40 ºC

Humidity: < 80%

Weight: 2.3 kg (without head)

Certificates: CE

LP-BT100-2J/DG-4(10)

NE-1200 Multi-channel Syringe Pumps

NE-1200 Multi-channel (12) Syringe Pumps

Multi-syringe pump with the same full-featured programmable capabilities as the NE-1000 (up to 12 channels). NE-1200 series allow infusion and withdrawal, and holds 2, 4, 6, 8, 10 or 12 syringes of up to 3 mL each with infusion rates from 0.008 µL/min to 2.0 mL/min.

NE-1200 Multi-channel (12) Syringe Pumps

Dimensions: 260 x 381 x 127 mm (D x W x H)

Working mode: Infusion/withdrawal

Channels: up to 12

Motor type: Step motor

Motor step per revolution: 200

Microstepping: 1/8 to 1/2 depending on motor speed

Advance per step: 0.1323 µm to 0.5292 µm depending on motor speed

Maximum speed: 35 mm/min

Minimum speed: 0.4 µm/min

Linear force: > 700 N at minimum speed, 130 N at maximum speed

Accuracy: Within +/- 1% over length of syringe, exclusive of syringe variations

Flow rate: 8 nL/min - 20 mL/min

Syringe size: 0.5 µL - 140 mL

Number of program phases: 41

Comm. interface: RS-232 (network up to 100 pumps)

Power supply: Unregulated linear external wall adapter, country and power source specific (or compatible regulated power supply)

Weight: 4.6 Kg

Certificates: CE

NE-1200

ME Single-Channel with Platinum Electrodes (50-µm)

ME Single-Channel with Platinum Electrodes (50-µm)

50-µm platinum working electrode and 250-µm reference and auxiliary electrodes. Detection system placed at the outlet of the separation channel with an end-channel approach. Compatible with microfluidic chip holder, HVStat and iHVStat instrument.

ME Single-Channel with Platinum Electrodes (50-µm)

Material: Glass/SU8

Dimensions: 38 x 13 x 0.8 mm (L x W x H)

Injection channel length: 10 mm

Separation channel length: 35 mm

Microchannel geometry: rectangular

Channel width: 50 µm

Channel height: 20 µm

Inlet / outlet: 2 mm Ø

Electrodes material: Ti / Pt

Electrodes thickness: 50/150 nm

Microelectrode width: 50µm

Reference electrode width: 250µm

Auxiliary electrode width: 250µm

Applications: Electrophoretic separations of organic compounds, cations, anions, DNA, peptides, etc.

Contents: from 1 chip

MCE-SU8-Pt001T

ME Single-Channel with Gold Electrodes (50-µm)

ME Single-Channel with Gold Electrodes (50-µm)

50-µm gold working electrode and 250-µm reference and auxiliary electrodes. Detection system placed at the outlet of the separation channel with an end-channel approach. Compatible with microfluidic chip holder, HVStat and iHVStat instrument.

ME Single-Channel with Gold Electrodes (50-µm)

Material: Glass/SU8

Dimensions: 38 x 13 x 0.8 mm (L x W x H)

Injection channel length: 10 mm

Separation channel length: 35 mm

Microchannel geometry: rectangular

Channel width: 50 µm

Channel height: 20 µm

Inlet / outlet: 2 mm Ø

Electrodes material: Ti / Au

Electrodes thickness: 50/150 nm

Microelectrode width: 50µm

Reference electrode width: 250µm

Auxiliary electrode width: 250µm

Applications: Electrophoretic separations of organic compounds, cations, anions, DNA, peptides, etc.

Contents: from 1 chip

MCE-SU8-Au001T

ME Single-Channel with Platinum Electrodes (100-µm)

ME Single-Channel with Platinum Electrodes (100-µm)

100-µm platinum working, reference and auxiliary electrodes. Detection system placed at the outlet of the separation channel with an end-channel approach. Compatible with microfluidic chip holder, HVStat and iHVStat instrument.

ME Single-Channel with Platinum Electrodes (100-µm)

Material: Glass/SU8

Dimensions: 38 x 13 x 0.8 mm (L x W x H)

Injection channel length: 10 mm

Separation channel length: 35 mm

Microchannel geometry: rectangular

Channel width: 50 µm

Channel height: 20 µm

Electrodes material: Ti / Pt

Electrodes thickness: 50/150 nm

Microelectrode width: 100µm

Reference electrode width: 100µm

Auxiliary electrode width: 100µm

Applications: Electrophoretic separations of organic compounds, cations, anions, DNA, peptides, etc.

Contents: from 1 chip

MCE-SU8-Pt002T

ME Single-Channel with Gold Electrodes (100-µm)

ME Single-Channel with Gold Electrodes (100-µm)

100-µm gold working, reference and auxiliary electrodes. Detection system placed at the outlet of the separation channel with an end-channel approach. Compatible with microfluidic chip holder, HVStat and iHVStat instrument.

ME Single-Channel with Gold Electrodes (100-µm)

Material: Glass/SU8

Dimensions: 38 x 13 x 0.8 mm (L x W x H)

Injection channel length: 10 mm

Separation channel length: 35 mm

Microchannel geometry: rectangular

Channel width: 50 µm

Channel height: 20 µm

Inlet / outlet: 2 mm Ø

Electrodes material: Ti / Au

Electrodes thickness: 50/150 nm

Microelectrode width: 100µm

Reference electrode width: 100µm

Auxiliary electrode width: 100µm

Applications: Electrophoretic separations of organic compounds, cations, anions, DNA, peptides, etc.

Contents: from 1 chip

MCE-SU8-Au002T

ME Single-Channel with Platinum Microelectrode Array

ME Single-Channel with Platinum Microelectrode Array

Six 10-µm platinum microelectrodes with 10-µm gap and 250-µm reference and auxiliary electrodes. Detection system placed at the outlet of the separation channel with an end-channel approach. Compatible with microfluidic chip holder, HVStat and iHVStat instrument.

ME Single-Channel with Platinum Microelectrode Array

Material: Glass/SU8

Dimensions: 38 x 13 x 0.8 mm (L x W x H)

Injection channel length: 10 mm

Separation channel length: 35 mm

Microchannel geometry: rectangular

Channel width: 50 µm

Channel height: 20 µm

Inlet / outlet: 2 mm Ø

Electrodes material: Ti / Pt

Electrodes thickness: 50/150 nm

Microelectrode width: 10 µm

Microelectrode gap: 10 µm

Number of microelectrodes: 6

Reference electrode width: 250µm

Auxiliary electrode width: 250µm

Applications: Electrophoretic separations of organic compounds, cations, anions, DNA, peptides, etc.

Contents: from 1 chip

MCE-SU8-MEA-Pt004T

ME Single-Channel with Gold Microelectrode Array

ME Single-Channel with Gold Microelectrode Array

Six 10-µm gold microelectrodes with 10-µm gap and 250-µm reference and auxiliary electrodes. Detection system placed at the outlet of the separation channel with an end-channel approach. Compatible with microfluidic chip holder, HVStat and iHVStat instrument.

ME Single-Channel with Gold Microelectrode Array

Material: Glass/SU8

Dimensions: 38 x 13 x 0.8 mm (L x W x H)

Injection channel length: 10 mm

Separation channel length: 35 mm

Microchannel geometry: rectangular

Channel width: 50 µm

Channel height: 20 µm

Electrodes material: Ti / Au

Electrodes thickness: 50/150 nm

Microelectrode width: 10 µm

Microelectrode gap: 10 µm

Number of microelectrodes: 6

Reference electrode width: 250µm

Auxiliary electrode width: 250µm

Applications: Electrophoretic separations of organic compounds, cations, anions, DNA, peptides, etc.

Contents: from 1 chip

MCE-SU8-MEA-Au004T

ME Single-Channel with Platinum InterDigitated Array Microelectrodes

ME Single-Channel with Platinum InterDigitated Array Microelectrodes

Two sets of three 10-µm platinum microelectrodes and 10-µm gap with an interdigitated (IDA) approach and 250-µm reference and auxiliary electrodes. Two working electrodes individually addressable. Detection system placed at the outlet of the separation channel with an end-channel approach. Compatible with microfluidic chip holder, HVStat and iHVStat instrument.

ME Single-Channel with Platinum InterDigitated Array Microelectrodes

Material: Glass/SU8

Dimensions: 38 x 13 x 0.8 mm (L x W x H)

Injection channel length: 10 mm

Separation channel length: 35 mm

Microchannel geometry: rectangular

Channel width: 50 µm

Channel height: 20 µm

Inlet / outlet: 2 mm Ø

Electrodes material: Ti / Pt

Electrodes thickness: 50/150 nm

Microelectrode width: 10 µm

Microelectrode gap: 10 µm

Number of fingers: 3 pairs

Reference electrode width: 250µm

Auxiliary electrode width: 250µm

Applications: Electrophoretic separations of organic compounds, cations, anions, DNA, peptides, etc.

Contents: from 1 chip

MCE-SU8-IDA-Pt005T

ME Single-Channel with Gold InterDigitated Array Microelectrodes

ME Single-Channel with Gold InterDigitated Array Microelectrodes

Two sets of three 10-µm gold microelectrodes and 10-µm gap with an interdigitated (IDA) approach and 250-µm reference and auxiliary electrodes. Two working electrodes individually addressable. Detection system placed at the outlet of the separation channel with an end-channel approach. Compatible with microfluidic chip holder, HVStat and iHVStat instrument.

ME Single-Channel with Gold InterDigitated Array Microelectrodes

Material: Glass/SU8

Dimensions: 38 x 13 x 0.8 mm (L x W x H)

Injection channel length: 10 mm

Separation channel length: 35 mm

Microchannel geometry: rectangular

Channel width: 50 µm

Channel height: 20 µm

Inlet / outlet: 2 mm Ø

Electrodes material: Ti / Au

Electrodes thickness: 50/150 nm

Microelectrode width: 10 µm

Microelectrode gap: 10 µm

Number of fingers: 3 pairs

Reference electrode width: 250µm

Auxiliary electrode width: 250µm

Applications: Electrophoretic separations of organic compounds, cations, anions, DNA, peptides, etc.

Contents: from 1 chip

MCE-SU8-IDA-Au005T

iFull PACK

Lab Practice - iFull PACK

The most complete i-pack provides all the tools necessaries for introducing the students in the use of miniaturized instrumentation and microfluidic devices. This i-pack includes:

  • MicruX® iHVStat Instrument + Accessories
  • Microfluidic Chip Holder
  • Microfluidic Electrophoresis Chips
  • Teacher & student's guides  
  • Excel Template
  • Reagents & other material  (syringes, filters, sample containers…)

Lab Practice - iFull PACK

Dimensions: 165 x 150 x 95 mm (L x W x H)

Contents: iHVStat + Microfluidic Holder + Standard Pack (MEs + Guides + Reagents)

Details: Available Practice: .:: Analysis of uric acid and related compounds in urine sample using ME-ED ::. & .:: Analysis of paracetamol and vitamin C in pharmaceuticals using ME-ED ::.

MXF-iPLAB-FP

Full PACK Micrux

Lab Practice - Full PACK

The most complete pack provides all the tools necessaries for introducing the students in the use of miniaturized instrumentation and microfluidic devices. This pack includes:

  • MicruX® HVStat Instrument + Accessories
  • Microfluidic Chip Holder
  • Microfluidic Electrophoresis Chips
  • Teacher & student's guides  
  • Excel Template
  • Reagents & other material  (syringes, filters, sample containers…)

Lab Practice - Full PACK

Dimensions: 165 x 150 x 85 mm (L x W x H)

Contents: HVStat + Microfluidic Holder + Standard Pack (MEs + Guides + Reagents)

Details: Available Practice: .:: Analysis of uric acid and related compounds in urine sample using ME-ED ::. & .:: Analysis of paracetamol and vitamin C in pharmaceuticals using ME-ED ::.

MXF-PLAB-FP

Standard PACK

Lab Practice - Standard PACK

The standard pack includes:

  • Microfluidic Electrophoresis Chips
  • Teacher & student’s guides
  • Excel Template
  • Reagents & other material (syringes, filters, sample containers…)

Lab Practice - Standard PACK

Contents: MEs + Guides + Reagents

Details: Available Practice: .:: Analysis of uric acid and related compounds in urine sample using ME-ED ::. & .:: Analysis of paracetamol and vitamin C in pharmaceuticals using ME-ED ::.

MX-PLAB-SP

Basic PACK

Lab Paractice - Basic PACK

The basic pack includes:

  • Teacher & student’s guide
  • Excel Template
  • Reagents & other material (syringes, filters, sample containers…)

Lab Paractice - Basic PACK

Contents: Guides + Reagents

Details: Available Practice: .:: Analysis of uric acid and related compounds in urine sample using ME-ED ::. & .:: Analysis of paracetamol and vitamin C in pharmaceuticals using ME-ED ::.

MX-PLAB-BP

Spare Kit

Lab Practice - Spare Kit

The spare kit for lab practices includes:

  • Reagents
  • Other material (syringes, filters, sample containers…)

Lab Practice - Spare Kit

Contents: Reagents

Details: Available Practice: .:: Analysis of uric acid and related compounds in urine sample using ME-ED ::. & .:: Analysis of paracetamol and vitamin C in pharmaceuticals using ME-ED ::.

MXF-PLAB-SK

Spare Kit

Lab Practice - Spare Kit

The spare kit for lab practices includes:

  • Reagents
  • Other material (syringes, filters, sample containers…)

Lab Practice - Spare Kit

Contents: Reagents

Details: Available Practice: .:: Analysis of uric acid and related compounds in urine sample using ME-ED ::. & .:: Analysis of paracetamol and vitamin C in pharmaceuticals using ME-ED ::.

MXF-PLAB-SK

NE-300 Just Infusion Syringe Pump

NE-300 Just Infusion Syringe Pump

NE-300 offers the most basic pumping system at a very affordable price. Infusion only, does not withdraw, volume target, nor have computer interface or programmability. 

NE-300 Just Infusion Syringe Pump

Dimensions: 229 x 146 x 114 mm (D x W x H)

Working mode: Infusion

Channels: 1

Motor type: Step motor

Motor step per revolution: 400

Microstepping: 1/8 to 1/2 depending on motor speed

Advance per step: 0.2126 µm to 0.8504 µm depending on motor speed

Maximum speed: 38 mm/min

Minimum speed: 0.7 µm/min

Linear force: > 150 N at minimum speed, 80 N at maximum speed

Accuracy: Within +/- 1% over length of syringe, exclusive of syringe variations

Flow rate: 12 nL/min - 20 mL/min

Syringe size: 1 - 60 mL (140 mL partially filled)

Power supply: Unregulated linear external wall adapter, country and power source specific (or compatible regulated power supply)

Weight: 1.63 Kg

Certificates: CE

NE-300

NE-1000 Full Featured Standalone Single-Syringe Pump

NE-1000 Full Featured Standalone Single-Syringe Pump

NE-1000 family offers a fully programmable syringe pump with infusion and withdrawal mode. It holds one syringe from 1 to 60 mL with infusion rates from 0.01 µL/min to 30 mL/min.

NE-1000 Full Featured Standalone Single-Syringe Pump

Dimensions: 229 x 146 x 114 mm (D x W x H)

Working mode: Infusion/withdrawal

Channels: 1

Motor type: Step motor

Motor step per revolution: 400

Microstepping: 1/8 to 1/2 depending on motor speed

Advance per step: 0.2126 µm to 0.8504 µm depending on motor speed

Maximum speed: 51 mm/min

Minimum speed: 0.7 µm/min

Linear force: > 150 N at minimum speed, 80 N at maximum speed

Accuracy: Within +/- 1% over length of syringe, exclusive of syringe variations

Flow rate: 12 nL/min - 30 mL/min

Syringe size: 1 - 60 mL (140 mL partially filled)

Number of program phases: 41

Comm. interface: RS-232 (network up to 100 pumps)

Power supply: Unregulated linear external wall adapter, country and power source specific (or compatible regulated power supply)

Weight: 1.63 Kg

Certificates: CE

Details: Lower (NE-1002X) and higher (NE-1010) flow rate models are available.  Other Features: • Built for Automation.  • Operates stand-alone or from a computer. • Easy-to-use keypad interface. • Applications range from simple infusions to complex pumping progra

NE-1000

NE-4000 Dual-channel Syringe Pump

NE-4000 Dual-channel Syringe Pump

NE-4000 offers full-featured programmable infusion and withdrawal. It is able to hold two syringes up to 60 mL with pumping rates from 25 µL/min to 100 mL/min. A 140 mL syringe can be filled up to 120 mL.

NE-4000 Dual-channel Syringe Pump

Dimensions: 229 x 146 x 114 mm (D x W x H)

Working mode: Infusion/withdrawal

Channels: 2

Motor type: Step motor

Motor step per revolution: 200

Microstepping: 1/8 to 1/2 depending on motor speed

Advance per step: 0.4252 µm to 1.7009 µm depending on motor speed

Maximum speed: 184 mm/min

Minimum speed: 1.3 µm/min

Linear force: > 400 N at minimum speed, 80 N at maximum speed

Accuracy: Within +/- 1% over length of syringe, exclusive of syringe variations

Flow rate: 25 µL/min - 100 mL/min

Syringe size: 1 - 60 mL (140 mL partially filled)

Number of program phases: 41

Comm. interface: RS-232 (network up to 100 pumps)

Power supply: Unregulated linear external wall adapter, country and power source specific (or compatible regulated power supply)

Weight: 1.63 Kg

Certificates: CE

NE-4000

NE-1600 Multi-channel Syringe Pumps

NE-1600 Multi-channel (6) Syringe Pump

Multi-syringe pump with the same full-featured programmable capabilities as the NE-1000 (up to 6 channels with infusion/withdrawal). NE-1600 holds 2, 4 or 6 syringes of up to 60 mL each or 2 or 4 syringes up to 140 mL each with infusion rates from 0.008 µL/min to 40 mL/min.

NE-1600 Multi-channel (6) Syringe Pump

Dimensions: 260 x 381 x 127 mm (D x W x H)

Working mode: Infusion/withdrawal

Channels: up to 6

Motor type: Step motor

Motor step per revolution: 200

Microstepping: 1/8 to 1/2 depending on motor speed

Advance per step: 0.1323 µm to 0.5292 µm depending on motor speed

Maximum speed: 35 mm/min

Minimum speed: 0.4 µm/min

Linear force: > 700 N at minimum speed, 130 N at maximum speed

Accuracy: Within +/- 1% over length of syringe, exclusive of syringe variations

Flow rate: 8 nL/min - 20 mL/min

Syringe size: 0.5 µL - 140 mL

Number of program phases: 41

Comm. interface: RS-232 (network up to 100 pumps)

Power supply: Unregulated linear external wall adapter, country and power source specific (or compatible regulated power supply)

Weight: 4.6 Kg

Certificates: CE

NE-1600

NE-1800 Multi-channel Syringe Pumps

NE-1800 Multi-channel (8) Syringe Pump

Multi-syringe pump with the same full-featured programmable capabilities as the NE-1000 (up to 8 channels). NE-1800 series allows infusion and withdrawal, and holds 2, 4, 6 or 8 syringes of up to 10 mL each with infusion rates from 0.008 µL/min to 5,7 mL/min.

NE-1800 Multi-channel (8) Syringe Pump

Dimensions: 260 x 381 x 127 mm (D x W x H)

Working mode: Infusion/withdrawal

Channels: up to 8

Motor type: Step motor

Motor step per revolution: 200

Microstepping: 1/8 to 1/2 depending on motor speed

Advance per step: 0.1323 µm to 0.5292 µm depending on motor speed

Maximum speed: 35 mm/min

Minimum speed: 0.4 µm/min

Linear force: > 700 N at minimum speed, 130 N at maximum speed

Accuracy: Within +/- 1% over length of syringe, exclusive of syringe variations

Flow rate: 8 nL/min - 20 mL/min

Syringe size: 0.5 µL - 140 mL

Number of program phases: 41

Comm. interface: RS-232 (network up to 100 pumps)

Power supply: Unregulated linear external wall adapter, country and power source specific (or compatible regulated power supply)

Weight: 4.6 Kg

Certificates: CE

NE-1800

Thin-layer Microfluidic Platinum Interdigitated Sensor (10/10 µm)

Thin-layer Microfluidic Platinum Interdigitated Sensor (10/10 µm)

15 pairs interdigitated platinum electrodes (10/10 µm, electrode/gap) integrated into a 40-µm height SU8 microchannel. Useful for FIA systems. Compatible with AIO and Multi8x AIO cell with TL add-ons.

Thin-layer Microfluidic Platinum Interdigitated Sensor (10/10 µm)

Dimensions: 10 x 6 x 0.75 mm

Substrate: Glass

Microfluidic stage: EPON SU8 resin

Channel width: 250 µm / 1mm (EC-cell)

Channel height: 40 µm

Inlet / outlet: 0.7 mm Ø

Electrodes material: Ti / Pt

Electrodes thickness: 50/150 nm

Microelectrode width: 10 µm

Microelectrode gap: 10 µm

Number of fingers: 15 pairs

Channel volume: 55 nL

Applications: Impedance, capacitance and conductivity measurements, fuel cells

Contents: 20 units/box

TL-IDA1-Pt (20 units/box)

Thin-layer Microfluidic Platinum Interdigitated Sensor (10/10 µm)

Thin-layer Microfluidic Platinum Interdigitated Sensor (10/10 µm)

15 pairs interdigitated platinum electrodes (10/10 µm, electrode/gap) integrated into a 40-µm height SU8 microchannel. Useful for FIA systems. Compatible with AIO and Multi8x AIO cell with TL add-ons.

Thin-layer Microfluidic Platinum Interdigitated Sensor (10/10 µm)

Dimensions: 10 x 6 x 0.75 mm

Substrate: Glass

Microfluidic stage: EPON SU8 resin

Channel width: 250 µm / 1mm (EC-cell)

Channel height: 40 µm

Inlet / outlet: 0.7 mm Ø

Electrodes material: Ti / Pt

Electrodes thickness: 50/150 nm

Microelectrode width: 10 µm

Microelectrode gap: 10 µm

Number of fingers: 15 pairs

Channel volume: 55 nL

Applications: Impedance, capacitance and conductivity measurements, fuel cells

Contents: 20 units/box

TL-IDA1-Pt (20 units/box)

Thin-layer Microfluidic Single Platinum Sensor

Thin-layer Microfluidic Single Platinum Sensor

Three platinum electrodes approach integrated into a 40-µm height SU8 microchannel. Useful for FIA systems. Compatible with AIO and Multi8x AIO cell with TL add-ons.

Thin-layer Microfluidic Single Platinum Sensor

Dimensions: 10 x 6 x 0.75 mm

Substrate: Glass

Microfluidic stage: EPON SU8 resin

Channel width: 250 µm / 1mm (EC-cell)

Channel height: 40 µm

Inlet / outlet: 0.7 mm Ø

Electrodes material: Ti / Pt

Electrodes thickness: 50/150 nm

WE size: 0.3 mm2

Channel volume: 55 nL

Applications: Electroanalysis, flow systems, nanotechnology, chemical sensors, biosensors

Contents: 20 units/box

TL-SE1-Pt (20 units/box)

Thin-layer Microfluidic Single Platinum Sensor

Thin-layer Microfluidic Single Platinum Sensor

Three platinum electrodes approach integrated into a 40-µm height SU8 microchannel. Useful for FIA systems. Compatible with AIO and Multi8x AIO cell with TL add-ons.

Thin-layer Microfluidic Single Platinum Sensor

Dimensions: 10 x 6 x 0.75 mm

Substrate: Glass

Microfluidic stage: EPON SU8 resin

Channel width: 250 µm / 1mm (EC-cell)

Channel height: 40 µm

Inlet / outlet: 0.7 mm Ø

Electrodes material: Ti / Pt

Electrodes thickness: 50/150 nm

WE size: 0.3 mm2

Channel volume: 55 nL

Applications: Electroanalysis, flow systems, nanotechnology, chemical sensors, biosensors

Contents: 20 units/box

TL-SE1-Pt (20 units/box)

Thin-layer Microfluidic Single Gold Sensor

Thin-layer Microfluidic Single Gold Sensor

Three gold electrode approach integrated into a 40-µm height SU8 microchannel. Useful for FIA systems for developing enzyme and immunosensors. Compatible with AIO and Multi8x AIO cell with TL add-ons.

Thin-layer Microfluidic Single Gold Sensor

Dimensions: 10 x 6 x 0.75 mm

Substrate: Glass

Microfluidic stage: EPON SU8 resin

Channel width: 250 µm / 1mm (EC-cell)

Channel height: 40 µm

Inlet / outlet: 0.7 mm Ø

Electrodes material: Ti / Au

Electrodes thickness: 50/150 nm

WE size: 0.3 mm2

Channel volume: 55 nL

Applications: Electroanalysis, flow systems, nanotechnology, chemical sensors, biosensors

Contents: 20 units/box

TL-SE1-Au (20 units/box)

Thin-layer Microfluidic Single Gold Sensor

Thin-layer Microfluidic Single Gold Sensor

Three gold electrode approach integrated into a 40-µm height SU8 microchannel. Useful for FIA systems for developing enzyme and immunosensors. Compatible with AIO and Multi8x AIO cell with TL add-ons.

Thin-layer Microfluidic Single Gold Sensor

Dimensions: 10 x 6 x 0.75 mm

Substrate: Glass

Microfluidic stage: EPON SU8 resin

Channel width: 250 µm / 1mm (EC-cell)

Channel height: 40 µm

Inlet / outlet: 0.7 mm Ø

Electrodes material: Ti / Au

Electrodes thickness: 50/150 nm

WE size: 0.3 mm2

Channel volume: 55 nL

Applications: Electroanalysis, flow systems, nanotechnology, chemical sensors, biosensors

Contents: 20 units/box

TL-SE1-Au (20 units/box)

Thin-layer Microfluidic Platinum Interdigitated Sensor (5/5 µm)

Thin-layer Microfluidic Platinum Interdigitated Sensor (5/5 µm)

30 pairs interdigitated platinum electrodes (5/5 µm, electrode/gap) integrated into 40-µm height SU8 microchannel. Useful for FIA systems. Compatible with AIO and Multi8x AIO cell with TL add-ons.

Thin-layer Microfluidic Platinum Interdigitated Sensor (5/5 µm)

Dimensions: 10 x 6 x 0.75 mm

Substrate: Glass

Microfluidic stage: EPON SU8 resin

Channel width: 250 µm / 1mm (EC-cell)

Channel height: 40 µm

Inlet / outlet: 0.7 mm Ø

Electrodes material: Ti / Pt

Electrodes thickness: 50/150 nm

Microelectrode width: 5 µm

Microelectrode gap: 5 µm

Number of fingers: 30 pairs

Channel volume: 55 nL

Applications: Impedance, capacitance and conductivity measurements, fuel cells

Contents: 20 units/box

TL-IDA5-Pt (20 units/box)

Thin-layer Microfluidic Platinum Interdigitated Sensor (5/5 µm)

Thin-layer Microfluidic Platinum Interdigitated Sensor (5/5 µm)

30 pairs interdigitated platinum electrodes (5/5 µm, electrode/gap) integrated into 40-µm height SU8 microchannel. Useful for FIA systems. Compatible with AIO and Multi8x AIO cell with TL add-ons.

Thin-layer Microfluidic Platinum Interdigitated Sensor (5/5 µm)

Dimensions: 10 x 6 x 0.75 mm

Substrate: Glass

Microfluidic stage: EPON SU8 resin

Channel width: 250 µm / 1mm (EC-cell)

Channel height: 40 µm

Inlet / outlet: 0.7 mm Ø

Electrodes material: Ti / Pt

Electrodes thickness: 50/150 nm

Microelectrode width: 5 µm

Microelectrode gap: 5 µm

Number of fingers: 30 pairs

Channel volume: 55 nL

Applications: Impedance, capacitance and conductivity measurements, fuel cells

Contents: 20 units/box

TL-IDA5-Pt (20 units/box)

Thin-layer Microfluidic Gold Interdigitated Sensor (10/10 µm)

Thin-layer Microfluidic Gold Interdigitated Sensor (10/10 µm)

15 pairs interdigitated gold electrodes (10/10 µm, electrode/gap) integrated into a 40-µm height SU8 microchannel. Useful for FIA systems. Compatible with AIO and Multi8x AIO cell with TL add-ons.

Thin-layer Microfluidic Gold Interdigitated Sensor (10/10 µm)

Dimensions: 10 x 6 x 0.75 mm

Substrate: Glass

Microfluidic stage: EPON SU8 resin

Channel width: 250 µm / 1mm (EC-cell)

Channel height: 40 µm

Inlet / outlet: 0.7 mm Ø

Electrodes material: Ti / Au

Electrodes thickness: 50/150 nm

Microelectrode width: 10 µm

Microelectrode gap: 10 µm

Number of fingers: 15 pairs

Channel volume: 55 nL

Applications: Impedance, capacitance and conductivity measurements, fuel cells

Contents: 20 units/box

TL-IDA1-Au (20 units/box)

Thin-layer Microfluidic Gold Interdigitated Sensor (10/10 µm)

Thin-layer Microfluidic Gold Interdigitated Sensor (10/10 µm)

15 pairs interdigitated gold electrodes (10/10 µm, electrode/gap) integrated into a 40-µm height SU8 microchannel. Useful for FIA systems. Compatible with AIO and Multi8x AIO cell with TL add-ons.

Thin-layer Microfluidic Gold Interdigitated Sensor (10/10 µm)

Dimensions: 10 x 6 x 0.75 mm

Substrate: Glass

Microfluidic stage: EPON SU8 resin

Channel width: 250 µm / 1mm (EC-cell)

Channel height: 40 µm

Inlet / outlet: 0.7 mm Ø

Electrodes material: Ti / Au

Electrodes thickness: 50/150 nm

Microelectrode width: 10 µm

Microelectrode gap: 10 µm

Number of fingers: 15 pairs

Channel volume: 55 nL

Applications: Impedance, capacitance and conductivity measurements, fuel cells

Contents: 20 units/box

TL-IDA1-Au (20 units/box)

Thin-layer Microfluidic Gold Interdigitated Sensor (5/5 µm)

Thin-layer Microfluidic Gold Interdigitated Sensor (5/5 µm)

30 pairs interdigitated gold electrodes (5/5 µm, electrode/gap) integrated into a 40-µm height SU8 microchannel. Useful for FIA systems. Compatible with AIO and Multi8x AIO cell with TL add-ons.

Thin-layer Microfluidic Gold Interdigitated Sensor (5/5 µm)

Dimensions: 10 x 6 x 0.75 mm

Substrate: Glass

Microfluidic stage: EPON SU8 resin

Channel width: 250 µm / 1mm (EC-cell)

Channel height: 40 µm

Inlet / outlet: 0.7 mm Ø

Electrodes material: Ti / Au

Electrodes thickness: 50/150 nm

Microelectrode width: 5 µm

Microelectrode gap: 5 µm

Number of fingers: 30 pairs

Channel volume: 55 nL

Applications: Impedance, capacitance and conductivity measurements, fuel cells

Contents: 20 units/box

TL-IDA5-Au (20 units/box)

Thin-layer Microfluidic Gold Interdigitated Sensor (5/5 µm)

Thin-layer Microfluidic Gold Interdigitated Sensor (5/5 µm)

30 pairs interdigitated gold electrodes (5/5 µm, electrode/gap) integrated into a 40-µm height SU8 microchannel. Useful for FIA systems. Compatible with AIO and Multi8x AIO cell with TL add-ons.

Thin-layer Microfluidic Gold Interdigitated Sensor (5/5 µm)

Dimensions: 10 x 6 x 0.75 mm

Substrate: Glass

Microfluidic stage: EPON SU8 resin

Channel width: 250 µm / 1mm (EC-cell)

Channel height: 40 µm

Inlet / outlet: 0.7 mm Ø

Electrodes material: Ti / Au

Electrodes thickness: 50/150 nm

Microelectrode width: 5 µm

Microelectrode gap: 5 µm

Number of fingers: 30 pairs

Channel volume: 55 nL

Applications: Impedance, capacitance and conductivity measurements, fuel cells

Contents: 20 units/box

TL-IDA5-Au (20 units/box)

Single Electrode Gold-Platinum

Thin-film Double-metal Single Electrode

Three electrode approach with gold WE and platinum RE and AE for selective coating processes. Good intra- and inter-electrode reproducibility. Compatible with Drop, AIO and Multi8x AIO cell.

Thin-film Double-metal Single Electrode

Dimensions: 10 x 6 x 0.75 mm

Substrate: Glass

Insulating layer: EPON SU8 resin

Electrochemical cell: 2 mm Ø

Electrodes material: WE: Ti / Au - RE: Ti / Pt - AE: Ti / Pt

Electrodes thickness: 50/150 nm

WE size: 1 mm Ø (0.8 mm2)

Applications: Electroanalysis, flow systems, nanotechnology, chemical sensors, biosensors

Contents: 25 units/box

ED-SE1-AuPt (25 units/box)

Thin-film Platinum 5µm-Microelectrode Array

Thin-film Platinum 5µm-Microelectrode Array

Three electrode platinum approach. WE coated with SU8 resin defining 5 µm microholes array with honeycomb structure. Useful for, oxygen, amonia, etc. Compatible with Drop, AIO and Multi8x AIO cell.

Thin-film Platinum 5µm-Microelectrode Array

Dimensions: 10 x 6 x 0.75 mm

Substrate: Glass

Insulating layer: EPON SU8 resin

Electrochemical cell: 2 mm Ø

Electrodes material: Ti / Pt

Electrodes thickness: 50/150 nm

Microholes diameter: 5 µm

Microholes number: 500

Microholes pitch: 50 µm

Applications: Electroanalysis, flow systems, nanotechnology, chemical sensors, biosensors

Contents: 50 units/box

ED-mSE-5-Pt (50 units/box)

Thin-film Platinum 10µm-Microelectrode Array

Thin-film Platinum 10µm-Microelectrode Array

Three electrode platinum approach. WE coated with SU8 resin defining 10 µm microholes array with honeycomb structure. Useful for, oxygen, amonia, etc. Compatible with Drop, AIO and Multi8x AIO cell.

Thin-film Platinum 10µm-Microelectrode Array

Dimensions: 10 x 6 x 0.75 mm

Substrate: Glass

Insulating layer: EPON SU8 resin

Electrochemical cell: 2 mm Ø

Electrodes material: Ti / Pt

Electrodes thickness: 50/150 nm

Microholes diameter: 10 µm

Microholes number: 90

Microholes pitch: 100 µm

Applications: Electroanalysis, flow systems, nanotechnology, chemical sensors, biosensors

Contents: 50 units/box

ED-mSE-10-Pt (50 units/box)

Thin-film Gold 10µm-Microelectrode Array

Thin-film Gold 10µm-Microelectrode Array

Three electrode gold approach. WE coated with SU8 resin defining 10 µm microholes array with honeycomb structure. Useful for, thiols, DNA, etc. Compatible with Drop, AIO and Multi8x AIO cell.

Thin-film Gold 10µm-Microelectrode Array

Dimensions: 10 x 6 x 0.75 mm

Substrate: Glass

Insulating layer: EPON SU8 resin

Electrochemical cell: 2 mm Ø

Electrodes material: Ti / Au

Electrodes thickness: 50/150 nm

Microholes diameter: 10 µm

Microholes number: 90

Microholes pitch: 100 µm

Applications: Electroanalysis, flow systems, nanotechnology, chemical sensors, biosensors

Contents: 50 units/box

ED-mSE-10-Au (50 units/box)

Thin-film Gold 5µm-Microelectrode Array

Thin-film Gold 5µm-Microelectrode Array

Three electrode gold approach. WE coated with SU8 resin defining 5 µm microholes array with honeycomb structure. Useful for, thiols, DNA, etc. Compatible with Drop, AIO and Multi8x AIO cell.

Thin-film Gold 5µm-Microelectrode Array

Dimensions: 10 x 6 x 0.75 mm

Substrate: Glass

Insulating layer: EPON SU8 resin

Electrochemical cell: 2 mm Ø

Electrodes material: Ti / Au

Electrodes thickness: 50/150 nm

Microholes diameter: 5 µm

Microholes number: 500

Microholes pitch: 50 µm

Applications: Electroanalysis, flow systems, nanotechnology, chemical sensors, biosensors

Contents: 50 units/box

ED-mSE-5-Au (50 units/box)

Thin-film Platinum InterDigitated Electrode (10/10 µm)

Thin-film Platinum InterDigitated Electrode (10/10 µm)

90 pairs of interdigitated platinum electrodes (10/10 µm, electrode/gap). Useful for optical and electrochemical (impedance) studies, scanning electrochemistry microscopy, etc. Compatible with Drop, AIO and Multi8x AIO cell.

Thin-film Platinum InterDigitated Electrode (10/10 µm)

Dimensions: 10 x 6 x 0.75 mm

Substrate: Glass

Insulating layer: EPON SU8 resin

Electrochemical cell: 3.5 mm Ø

Electrodes material: Ti / Pt

Electrodes thickness: 50/150 nm

Microelectrode width: 10 µm

Microelectrode gap: 10 µm

Number of fingers: 90 pairs

Applications: Impedance, capacitance and conductivity measurements, fuel cells

Contents: 50 units/box

ED-IDE1-Pt (50 units/box)

Thin-film Platinum InterDigitated Electrode (10/5 µm)

Thin-film Platinum InterDigitated Electrode (10/5 µm)

120 pairs of interdigitated platinum electrodes (10/5 µm, electrode/gap). Useful for optics, electrochemistry (impedance, conductivity...), scanning electrochemistry microscopy, etc. Compatible with Drop, AIO and Multi8x AIO cell.

Thin-film Platinum InterDigitated Electrode (10/5 µm)

Dimensions: 10 x 6 x 0.75 mm

Substrate: Glass

Insulating layer: EPON SU8 resin

Electrochemical cell: 3.5 mm Ø

Electrodes material: Ti / Pt

Electrodes thickness: 50/150 nm

Microelectrode width: 10 µm

Microelectrode gap: 5 µm

Number of fingers: 120 pairs

Applications: Impedance, capacitance and conductivity measurements, fuel cells

Contents: 50 units/box

ED-IDE2-Pt (50 units/box)

Thin-film Platinum InterDigitated Electrode (5/5 µm)

Thin-film Platinum InterDigitated Electrode (5/5 µm)

180 pairs of interdigitated platinum electrodes (5/5 µm, electrode/gap). Useful for optics, electrochemistry, scanning electrochemistry microscopy, etc. Compatible with Drop, AIO and Multi8x AIO cell.

Thin-film Platinum InterDigitated Electrode (5/5 µm)

Dimensions: 10 x 6 x 0.75 mm

Substrate: Glass

Insulating layer: EPON SU8 resin

Electrochemical cell: 3.5 mm Ø

Electrodes material: Ti / Pt

Electrodes thickness: 50/150 nm

Microelectrode width: 5 µm

Microelectrode gap: 5 µm

Number of fingers: 180 pairs

Applications: Impedance, capacitance and conductivity measurements, fuel cells

Contents: 50 units/box

ED-IDE3-Pt (50 units/box)

Thin-film Gold InterDigitated Electrode (10/10 µm)

Thin-film Gold InterDigitated Electrode (10/10 µm) 

90 pairs of interdigitated gold electrodes (10/10 µm, electrode/gap). Useful for optical and electrochemical (impedance) studies, spectroelectrochemistry, etc. Compatible with Drop, AIO and Multi8x AIO cell.

Thin-film Gold InterDigitated Electrode (10/10 µm)

Dimensions: 10 x 6 x 0.75 mm

Substrate: Glass

Insulating layer: EPON SU8 resin

Electrochemical cell: 3.5 mm Ø

Electrodes material: Ti / Au

Electrodes thickness: 50/150 nm

Microelectrode width: 10 µm

Microelectrode gap: 10 µm

Number of fingers: 90 pairs

Applications: Impedance, capacitance and conductivity measurements, fuel cells

Contents: 50 units/box

ED-IDE1-Au (50 units/box)

Thin-film Gold InterDigitated Electrode (10/5 µm)

Thin-film Gold InterDigitated Electrode (10/5 µm) 

120 pairs of interdigitated gold electrodes (10/5 µm, electrode/gap). Useful for optical and electrochemical (impedance) studies, spectroelectrochemistry, etc. Compatible with Drop, AIO and Multi8x AIO cell.

Thin-film Gold InterDigitated Electrode (10/5 µm)

Dimensions: 10 x 6 x 0.75 mm

Substrate: Glass

Insulating layer: EPON SU8 resin

Electrochemical cell: 3.5 mm Ø

Electrodes material: Ti / Au

Electrodes thickness: 50/150 nm

Microelectrode width: 10 µm

Microelectrode gap: 5 µm

Number of fingers: 120 pairs

Applications: Impedance, capacitance and conductivity measurements, fuel cells

Contents: 50 units/box

ED-IDE2-Au (50 units/box)

Thin-film Gold InterDigitated Electrode (5/5 µm)

Thin-film Gold InterDigitated Electrode (5/5 µm)

180 pairs of interdigitated gold electrodes (5/5 µm, electrode/gap). Useful for optical and electrochemical (impedance) studies, spectroelectrochemistry, etc. Compatible with Drop, AIO and Multi8x AIO cell.

Thin-film Gold InterDigitated Electrode (5/5 µm)

Dimensions: 10 x 6 x 0.75 mm

Substrate: Glass

Insulating layer: EPON SU8 resin

Electrochemical cell: 3.5 mm Ø

Electrodes material: Ti / Au

Electrodes thickness: 50/150 nm

Microelectrode width: 5 µm

Microelectrode gap: 5 µm

Number of fingers: 180 pairs

Applications: Impedance, capacitance and conductivity measurements, fuel cells

Contents: 50 units/box

ED-IDE3-Au (50 units/box)

Thin-film Platinum InterDigitated Array Microelectrode (10/10 µm)

Thin-film Platinum InterDigitated Array Microelectrode (10/10 µm)

15 pairs interdigitated platinum electrodes (10/10 µm, electrode/gap) integrating reference and counter electrodes. Useful for gas sensor (oxygen, nitrogen dioxide…), explosives, etc... detection. Compatible with Drop, AIO and Multi8x AIO cell.

Thin-film Platinum InterDigitated Array Microelectrode (10/10 µm)

Dimensions: 10 x 6 x 0.75 mm

Substrate: Glass

Insulating layer: EPON SU8 resin

Electrochemical cell: 2 mm Ø

Electrodes material: Ti / Pt

Electrodes thickness: 50/150 nm

Microelectrode width: 10 µm

Microelectrode gap: 10 µm

Number of fingers: 15 pairs

Applications: Electroanalysis, flow systems, nanotechnology, chemical sensors, biosensors

Contents: 50 units/box

ED-IDA1-Pt (50 units/box)

Thin-film Platinum InterDigitated Array Microelectrode (10/5 µm)

Thin-film Platinum InterDigitated Array Microelectrode (10/5 µm) 

20 pairs interdigitated platinum electrodes (10/5 µm, electrode/gap) integrating reference and auxiliary electrodes. Useful for gas sensor (oxygen, nitrogen dioxide…), explosives, etc... detection. Compatible with Drop, AIO and Multi8x AIO cell.

Thin-film Platinum InterDigitated Array Microelectrode (10/5 µm)

Dimensions: 10 x 6 x 0.75 mm

Substrate: Glass

Insulating layer: EPON SU8 resin

Electrochemical cell: 2 mm Ø

Electrodes material: Ti / Pt

Electrodes thickness: 50/150 nm

Microelectrode width: 10 µm

Microelectrode gap: 5 µm

Number of fingers: 20 pairs

Applications: Electroanalysis, flow systems, nanotechnology, chemical sensors, biosensors

Contents: 50 units/box

ED-IDA5-Pt (50 units/box)

Thin-film Platinum InterDigitated Array Microelectrode (5/5 µm)

Thin-film Platinum InterDigitated Array Microelectrode (5/5 µm) 

30 pairs interdigitated platinum electrodes (5/5 µm, electrode/gap) integrating reference and counter electrode. Useful for gas sensor (oxygen, nitrogen dioxide…), explosives, etc... detection. Compatible with Drop, AIO and Multi8x AIO cell.

Thin-film Platinum InterDigitated Array Microelectrode (5/5 µm)

Dimensions: 10 x 6 x 0.75 mm

Substrate: Glass

Insulating layer: EPON SU8 resin

Electrochemical cell: 2 mm Ø

Electrodes material: Ti / Pt

Electrodes thickness: 50/150 nm

Microelectrode width: 5 µm

Microelectrode gap: 5 µm

Number of fingers: 30 pairs

Applications: Electroanalysis, flow systems, nanotechnology, chemical sensors, biosensors

Contents: 50 units/box

ED-IDA6-Pt (50 units/box)

Thin-film Gold InterDigitated Array Microelectrode (10/10 µm)

Thin-film Gold InterDigitated Array Microelectrode (10/10 µm)

15 pairs interdigitated gold electrodes (10/10 µm, electrode/gap) integrating reference and auxiliary electrodes. Useful for thiols, uric acid, ascorbic acid, cancer biomarkers, insecticides, etc... detection. Compatible with Drop, AIO and Multi8x AIO cell.

Thin-film Gold InterDigitated Array Microelectrode (10/10 µm)

Dimensions: 10 x 6 x 0.75 mm

Substrate: Glass

Insulating layer: EPON SU8 resin

Electrochemical cell: 2 mm Ø

Electrodes material: Ti / Au

Electrodes thickness: 50/150 nm

Microelectrode width: 10 µm

Microelectrode gap: 10 µm

Number of fingers: 15 pairs

Applications: Electroanalysis, flow systems, nanotechnology, chemical sensors, biosensors

Contents: 50 units/box

ED-IDA1-Au (50 units/box)

Thin-film Gold InterDigitated Array Microelectrode (10/5 µm)

Thin-film Gold InterDigitated Array Microelectrode (10/5 µm) 

20 pairs interdigitated gold electrodes (10/5 µm, electrode/gap) integrating reference and counter electrodes. Useful for thiols, uric acid, ascorbic acid, cancer biomarkers, insecticides, etc detection. Compatible with Drop, AIO and Multi8x AIO cell.

Thin-film Gold InterDigitated Array Microelectrode (10/5 µm)

Dimensions: 10 x 6 x 0.75 mm

Substrate: Glass

Insulating layer: EPON SU8 resin

Electrochemical cell: 2 mm Ø

Electrodes material: Ti / Au

Electrodes thickness: 50/150 nm

Microelectrode width: 10 µm

Microelectrode gap: 5 µm

Number of fingers: 20 pairs

Applications: Electroanalysis, flow systems, nanotechnology, chemical sensors, biosensors

Contents: 50 units/box

ED-IDA5-Au (50 units/box)

Thin-film Gold InterDigitated Array Microelectrode (5/5 µm)

Thin-film Gold InterDigitated Array Microelectrode (5/5 µm) 

30 pairs interdigitated gold electrodes (5/5 µm, electrode/gap) integrating reference and auxiliary electrodes. Useful for thiols, uric acid, ascorbic acid, cancer biomarkers, insecticides, etc... detection. Compatible with Drop, AIO and Multi8x AIO cell.

Thin-film Gold InterDigitated Array Microelectrode (5/5 µm)

Dimensions: 10 x 6 x 0.75 mm

Substrate: Glass

Insulating layer: EPON SU8 resin

Electrochemical cell: 2 mm Ø

Electrodes material: Ti / Au

Electrodes thickness: 50/150 nm

Microelectrode width: 5 µm

Microelectrode gap: 5 µm

Number of fingers: 30 pairs

Applications: Electroanalysis, flow systems, nanotechnology, chemical sensors, biosensors

Contents: 50 units/box

ED-IDA6-Au (50 units/box)

Thin-film Platinum InterDigitated Ring Array microelectrode (10/10 µm)

Thin-film Platinum InterDigitated Ring Array microelectrode (10/10 µm) 

12 pairs interdigitated platinum electrodes (10/10 µm, electrode/gap) with radial design focused on flow analysis systems. Compatible with Drop, AIO and Multi8x AIO cell.

Thin-film Platinum InterDigitated Ring Array microelectrode (10/10 µm)

Dimensions: 10 x 6 x 0.75 mm

Substrate: Glass

Insulating layer: EPON SU8 resin

Electrochemical cell: 2 mm Ø

Electrodes material: Ti / Pt

Electrodes thickness: 50/150 nm

Microelectrode width: 10 µm

Microelectrode gap: 10 µm

Number of fingers: 12 pairs

Applications: Electroanalysis, flow systems, nanotechnology, chemical sensors, biosensors

Contents: 50 units/box

ED-IDRA1-Pt (50 units/box)

Interdigitated Ring Array Electrodes Gold

Thin-film Gold InterDigitated Ring Array Microelectrode (10/10 µm)

12 pairs interdigitated gold electrodes (10/10 µm, electrode/gap) with radial design focused on flow analysis systems. Compatible with Drop, AIO and Multi8x AIO cell.

Thin-film Gold InterDigitated Ring Array Microelectrode (10/10 µm)

Dimensions: 10 x 6 x 0.75 mm

Substrate: Glass

Insulating layer: EPON SU8 resin

Electrochemical cell: 2 mm Ø

Electrodes material: Ti / Au

Electrodes thickness: 50/150 nm

Microelectrode width: 10 µm

Microelectrode gap: 10 µm

Number of fingers: 12 pairs

Applications: Electroanalysis, flow systems, nanotechnology, chemical sensors, biosensors

Contents: 50 units/box

ED-IDRA1-Au (50 units/box)

Gold Single Electrode

Thin-film Gold Single Electrode

Three electrode gold approach. Good intra- and inter-electrode reproducibility. Useful for explosive, thiols, DNA, etc... detection as well as enzyme and immunosensors. Compatible with Drop, AIO and Multi8x AIO cell.

Thin-film Gold Single Electrode

Dimensions: 10 x 6 x 0.75 mm

Substrate: Glass

Insulating layer: EPON SU8 resin

Electrochemical cell: 2 mm Ø

Electrodes material: Ti / Au

Electrodes thickness: 50/150 nm

WE size: 1 mm Ø (0.8 mm2)

Applications: Electroanalysis, flow systems, nanotechnology, chemical sensors, biosensors

Contents: 50 units/box

ED-SE1-Au (50 units/box)

Single Electrode Platinum

Thin-film Platinum Single Electrode

Three electrode platinum approach. Good intra- and inter-electrode reproducibility. Useful for oxygen, amonia, etc... detection as well as gas sensor development. Compatible with Drop, AIO and Multi8x AIO cell.

Thin-film Platinum Single Electrode

Dimensions: 10 x 6 x 0.75 mm

Substrate: Glass

Insulating layer: EPON SU8 resin

Electrochemical cell: 2 mm Ø

Electrodes material: Ti / Pt

Electrodes thickness: 50/150 nm

WE size: 1 mm Ø (0.8 mm2)

Applications: Electroanalysis, flow systems, nanotechnology, chemical sensors, biosensors

Contents: 50 units/box

ED-SE1-Pt (50 units/box)

93 Products. View all

Returns

All the information that you should know about our returns policy...

More information

Contact

Contact us to solve your doubts or answer your questions. We can help you!

More information

Delivery

We ship the products under strict security measures, ensuring their protection...

More information

subscribe to our monthly newsletter