• |

Shop

MicruX ECStat

ECStat Electrochemical Station

USB-powered All-in-One Electrochemical Workstation, including a Bipotentiostat / Galvonostat with built-in Impedance Analyzer, in a very compact and portable equipment. USB interfacing and fully controlled by MicruX EC Manager PC software. More than 25 electroanalytical techniques. Compatible with electrochemical platformsthick-film and thin-film electrodes.

ECStat Electrochemical Station

Dimensions: 160 x 100 x 45 mm (L x W x H)

Operating modes: bipotentiostat, potentiostat, ZRA, galvanostat, PEIS analyzer

LED indicators: power on, cell on

Comm. interface: USB-C

Power supply: USB

Operating temperature: 0 ºC to +50 ºC

DC-potential range: ± 10 V

Compliance voltage: ± 10 V

DC-potential resolution: 75 µV

Applied potential accuracy: ≤ 0.1% ± 1 mV offset

Current ranges: 100 pA to 10 mA (9 ranges)

Maximun DC current: ± 30 mA

Current accuracy: ≤ 0.1 % (at Full Scale Range)

Measured current resolution: 0.006 % of current range (5 fA on 100 pA range)

EIS - Frequency range: 10 μHz to 1 MHz

EIS - AC-amplitude range: 1 mV to 250 mV rms, or 0.6 V p-p

Housing: Aluminum case

Weight: < 0.5 Kg

Certificates: CE

Details: MicruX ECStat is provided in a plastic briefcase with all the accessories and software for interfacing with the computer and sensors.

ECSTAT

MicruX ECStat

ECStat Electrochemical Station

USB-powered All-in-One Electrochemical Workstation, including a Bipotentiostat / Galvonostat with built-in Impedance Analyzer, in a very compact and portable equipment. USB interfacing and fully controlled by MicruX EC Manager PC software. More than 25 electroanalytical techniques. Compatible with electrochemical platformsthick-film and thin-film electrodes.

ECStat Electrochemical Station

Dimensions: 160 x 100 x 45 mm (L x W x H)

Operating modes: bipotentiostat, potentiostat, ZRA, galvanostat, PEIS analyzer

LED indicators: power on, cell on

Comm. interface: USB-C

Power supply: USB

Operating temperature: 0 ºC to +50 ºC

DC-potential range: ± 10 V

Compliance voltage: ± 10 V

DC-potential resolution: 75 µV

Applied potential accuracy: ≤ 0.1% ± 1 mV offset

Current ranges: 100 pA to 10 mA (9 ranges)

Maximun DC current: ± 30 mA

Current accuracy: ≤ 0.1 % (at Full Scale Range)

Measured current resolution: 0.006 % of current range (5 fA on 100 pA range)

EIS - Frequency range: 10 μHz to 1 MHz

EIS - AC-amplitude range: 1 mV to 250 mV rms, or 0.6 V p-p

Housing: Aluminum case

Weight: < 0.5 Kg

Certificates: CE

Details: MicruX ECStat is provided in a plastic briefcase with all the accessories and software for interfacing with the computer and sensors.

ECSTAT

Printed Carbon Single Electrode

Thick-film Carbon Electrode

Carbon-based screen-printed electrodes with a classical three-electrodes approach. Ideal to work with microvolume, showing an excellent intra- and inter-electrode precision. Useful for developing low-cost, disposable chemical sensors and biosensors. Different accessories available.

Thick-film Carbon Electrode

Dimensions: 27.5 x 10.1 x 0.35 mm

Substrate: PET (white)

Electrodes material: WE: C / RE: Ag / AE: C

WE size: 3 mm Ø (7.1 mm2)

Applications: Electroanalysis, flow systems, nanotechnology, chemical sensors, biosensors

Contents: 50 units/box

ED-S1PE-C (50 units/box)

AIO-SPE

All-In-One SPE Platform (1xAdd-on)

AIO-SPE cell with one add-on for using printed electrodes in static or dynamic conditions. Compatible with Flow or Batch add-ons. The cell is also compatible with EEP platform.

All-In-One SPE Platform (1xAdd-on)

Material: Aluminium base + methacrylate add-ons

Dimensions: 60 x 40 x 15/30 mm (W x D x H)

Contents: AIO cell + 1 Add-on (to be chosen) + SPE cable (male or female banana end)

Details: Easy and fast electrode replacement. Different movable add-ons are available. Easy add-ons assembly (tool free). Reusable - long life

ED-AIO-SPE-CELL-1x

All-In-One SPE Platform (2xAdd-ons)

AIO-SPE cell with two add-ons for using printed electrodes in static and dynamic conditions. The cell includes the Flow and Batch add-ons. The cell is also compatible with EEP platform

All-In-One SPE Platform (2xAdd-ons)

Material: Aluminium base + methacrylate add-ons

Dimensions: 60 x 40 x 15/30 mm (W x D x H)

Contents: AIO cell + 2 Add-ons (Flow and Batch) + SPE cable (male or female banana end)

Details: Easy and fast electrode replacement. Easy add-ons assembly (tool free). Reusable - long life

ED-AIO-SPE-CELL-2x

L100-1E Single-channel Peristaltic Pump

L100-1E Basic Single-channel Peristaltic Pump

Compact single-channel peristaltic pump with small-foot print for saving more space on your benchtop. Speed range is 0.1 - 100 rpm and flow rate range is 0.000166 – 32 mL/min. It is created for transferring, feed, sampling, or filling applications in laboratories and research settings. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.

L100-1E Basic Single-channel Peristaltic Pump

Dimensions: 197 x 110 x 91 mm (L x W x H)

Channels: 1

Flow rate: 0.000166 - 32 mL/min

Speed: 0.1 -100 rpm, CW/CCW

Speed precision: 0.1 rpm

Control mode: Membrane keypad (start/stop, direction and speed)

Display: 3-digit LED display for current speed. 2 LED indicators for running direction

Power off memory: Return to previous state when power on

Prime key: Fast filling and emptying at full speed

Rollers (materials): 10 (stainless steel)

Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm

Max. pressure: 15 psi (1 bar)

Power supply: AC 100-240V, 50/60Hz

Power consumption: 15W

Operating temperature: 0 to 40 ºC

Humidity: < 80%

Weight: 2.3 kg (without head)

IP rate: IP31

Certificates: CE

LP-L100-1E/DG-1(10)

L100-1E Dual-channel Peristaltic Pump

L100-1E Basic Dual-channel Peristaltic Pump

Compact dual-channel peristaltic pump with small-foot print for saving more space on your benchtop. Speed range is 0.1 - 100 rpm and flow rate range is 0.000166 – 32 mL/min. It is created for transferring, feed, sampling, or filling applications in laboratories and research settings. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.

L100-1E Basic Dual-channel Peristaltic Pump

Dimensions: 197 x 110 x 91 mm (L x W x H)

Channels: 2

Flow rate: 0.000166 - 32 mL/min

Speed: 0.1 -100 rpm, CW/CCW

Speed precision: 0.1 rpm

Control mode: Membrane keypad (start/stop, direction and speed)

Display: 3-digit LED display for current speed. 2 LED indicators for running direction

Power off memory: Return to previous state when power on

Prime key: Fast filling and emptying at full speed

Rollers (materials): 10 (stainless steel)

Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm

Max. pressure: 15 psi (1 bar)

Power supply: AC 100-240V, 50/60Hz

Power consumption: 15W

Operating temperature: 0 to 40 ºC

Weight: 2.3 kg (without head)

IP rate: IP31

Certificates: CE

LP-L100-1E/DG-2(10)

L100-1S Single-channel Peristaltic Pump

L100-1S Standard Single-channel Peristaltic Pump

Standard single-channel peristaltic pump with precise speed control in 0.01 rpm resolution (10000:1 turndown ratio) and flow rate calibration function. The pump has more accurate and wider range of flow rate from 0.15 µL/min to 32 mL/min. Mainly designed for laboratory and light industry applications. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.

L100-1S Standard Single-channel Peristaltic Pump

Dimensions: 232 x 142 x 149 mm (L x W x H)

Working mode: Speed control and flow rate mode

Channels: 1

Flow rate: 0.15 µL/min – 32 mL/min

Comm. interface: RS485. Longer or Modbus protocol

Speed: 0.01 -100 rpm, CW/CCW

Speed precision: 0.01 rpm

Control mode: Membrane keypad, external signal and communication control

Display: LCD

Power off memory: Operating parameters will be saved automatically. The pump status when powered up could be set as stop or as the status before power loss

External control signal: Start/stop, direction and speed control (4-20mA, 0-5V, 0-10V, 0-10kHz external control module optional)

Prime key: Fast filling and emptying at full speed

Rollers (materials): 10 (stainless steel)

Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm

Max. pressure: 15 psi (1 bar)

Power supply: AC 100-240V, 50/60Hz

Power consumption: 25W

Operating temperature: 0 to 40 ºC

Humidity: < 80%

Weight: 2.38 Kg

IP rate: IP31

Certificates: CE

LP-L100-1S/DG-1(10)

L100-1S Dual-channel Peristaltic Pump

L100-1S Standard Dual-channel Peristaltic Pump

Standard dual-channel peristaltic pump with precise speed control in 0.01 rpm resolution (10000:1 turndown ratio) and flow rate calibration function. The pump has more accurate and wider range of flow rate from 0.15 µL/min to 32 mL/min. Mainly designed for laboratory and light industry applications. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.

L100-1S Standard Dual-channel Peristaltic Pump

Dimensions: 232 x 142 x 149 mm (L x W x H)

Working mode: Speed control and flow rate mode

Channels: 2

Flow rate: 0.15 µL/min – 32 mL/min

Comm. interface: RS485. Longer or Modbus protocol

Speed: 0.01 -100 rpm, CW/CCW

Speed precision: 0.01 rpm

Control mode: Membrane keypad, external signal and communication control

Display: LCD

Power off memory: Operating parameters will be saved automatically. The pump status when powered up could be set as stop or as the status before power loss

External control signal: Start/stop, direction and speed control (4-20mA, 0-5V, 0-10V, 0-10kHz external control module optional)

Prime key: Fast filling and emptying at full speed

Rollers (materials): 10 (stainless steel)

Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm

Max. pressure: 15 psi (1 bar)

Power supply: AC 100-240V, 50/60Hz

Power consumption: 25W

Operating temperature: 0 to 40 ºC

Humidity: < 80%

Weight: 2.38 Kg

IP rate: IP31

Certificates: CE

LP-L100-1S/DG-2(10)

L100-1S 4-channels Peristaltic Pump

L100-1S Standard Multi-channel (4) Peristaltic Pump

Standard 4-channels peristaltic pump with precise speed control in 0.01 rpm resolution (10000:1 turndown ratio) and flow rate calibration function. The pump has more accurate and wider range of flow rate from 0.15 µL/min to 32 mL/min. Mainly designed for laboratory and light industry applications. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.

L100-1S Standard Multi-channel (4) Peristaltic Pump

Dimensions: 232 x 142 x 149 mm (L x W x H)

Working mode: Speed control and flow rate mode

Channels: 4

Flow rate: 0.15 µL/min – 32 mL/min

Comm. interface: RS485. Longer or Modbus protocol

Speed: 0.01 -100 rpm, CW/CCW

Speed precision: 0.01 rpm

Control mode: Membrane keypad, external signal and communication control

Display: LCD

Power off memory: Operating parameters will be saved automatically. The pump status when powered up could be set as stop or as the status before power loss

External control signal: Start/stop, direction and speed control (4-20mA, 0-5V, 0-10V, 0-10kHz external control module optional)

Prime key: Fast filling and emptying at full speed

Rollers (materials): 10 (stainless steel)

Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm

Max. pressure: 15 psi (1 bar)

Power supply: AC 100-240V, 50/60Hz

Power consumption: 25W

Operating temperature: 0 to 40 ºC

Humidity: < 80%

Weight: 2.38 Kg

IP rate: IP31

Certificates: CE

LP-L100-1S/DG-4(10)

L100-1F Single-channel Peristaltic Pump

L100-1F Intelligent Single-channel Peristaltic Pump

Smart single-channel peristaltic pump with 7' color display, full touch screen and intuitive graphic interface, provide easy-to-use operations. Powerful function and flexible configuration, make it easier to run multi-step complex programs. Suitable for laboratorial and industrial application. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.

L100-1F Intelligent Single-channel Peristaltic Pump

Dimensions: 180 x 292 x 235 mm (L x W x H)

Working mode: Programming

Channels: 1

Flow rate: 0.15 µL/min – 32 mL/min

Comm. interface: USB or RS485(RJ11). Modbus protocol

Speed: 0.1 -100 rpm, CW/CCW

Speed precision: 0.1 rpm

Control mode: Touch screen control, footswitch control, external signal control and communication control

Display: 7” 1024*600 color LCD

Power off memory: Pump can start running at desired time

External control signal: Start/stop control, direction control: voltage level signal or switch signal (dry contact)

Prime key: Fast filling and emptying at full speed

Rollers (materials): 10 (stainless steel)

Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm

Max. pressure: 15 psi (1 bar)

Power supply: AC 220V±20% / AC 110V±20%, 50Hz/60Hz

Power consumption: 50W

Operating temperature: 0 to 40 ºC

Humidity: < 80%

Weight: 5.0 Kg

IP rate: IP31

Certificates: CE

LP-L100-1F/DG-1(10)

L100-1F Dual-channel Peristaltic Pump

L100-1F Intelligent Dual-channel Peristaltic Pump

Smart dual-channel peristaltic pump with 7' color display, full touch screen and intuitive graphic interface, provide easy-to-use operations. Powerful function and flexible configuration, make it easier to run multi-step complex programs. Suitable for laboratorial and industrial application. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.

L100-1F Intelligent Dual-channel Peristaltic Pump

Dimensions: 180 x 292 x 235 mm (L x W x H)

Working mode: Programming

Channels: 2

Flow rate: 0.15 µL/min – 32 mL/min

Comm. interface: USB or RS485(RJ11). Modbus protocol

Speed: 0.1 -100 rpm, CW/CCW

Speed precision: 0.1 rpm

Control mode: Touch screen control, footswitch control, external signal control and communication control

Display: 7” 1024*600 color LCD

Power off memory: Pump can start running at desired time

External control signal: Start/stop control, direction control: voltage level signal or switch signal (dry contact)

Prime key: Fast filling and emptying at full speed

Rollers (materials): 10 (stainless steel)

Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm

Max. pressure: 15 psi (1 bar)

Power supply: AC 220V±20% / AC 110V±20%, 50Hz/60Hz

Power consumption: 50W

Operating temperature: 0 to 40 ºC

Humidity: < 80%

Weight: 5.0 Kg

IP rate: IP31

Certificates: CE

LP-L100-1F/DG-2(10)

101 Products. View all

Returns

All the information that you should know about our returns policy...

More information

Contact

Contact us to solve your doubts or answer your questions. We can help you!

More information

Delivery

We ship the products under strict security measures, ensuring their protection...

More information

subscribe to our monthly newsletter