SP Series

SP Series

High-tech peristaltic pumps, syringe pumps and other fluid precision transfer equipment suitable for research laboratories, bio-pharmaceuticals, food & beverage, fine chemical, environment, etc.

Products

ISPLab01 Intelligent Single-Channel Syringe Pump

ISPLab01 Intelligent Single-Channel Syringe Pump

Single-channel syringe pump with infusion/withdrawal mode, stainless steel body, and touch screen chromatic LCD easy to operate. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.

ISPLab01 Intelligent Single-Channel Syringe Pump

Dimensions: 282 x 209 x 161 mm (D x W x H)

Working mode: Infusion, withdrawal, infusion/withdrawal, withdrawal/infusion

Channels: 1

Advance per step: 0.078 µm

Linear force: 8 - 20 Kgf, online adjust

Accuracy: ≤± 0,5 %

Flow rate: 0,001 µL/min – 127 mL/min

Syringe size: 10 µL – 140 mL

Comm. interface: RS232 + RS485 (Modbus protocol, RTU mode)

Max. linear rate: 132 mm/min

Min. linear rate: 5 µm/min

Max. step rate: 0.937 s/microstep

Min. step rate: 0.035 ms/microstep

Control mode: Touch screen and mechanical keypad

Display: 320 x 240 TFT-LCD

Output state: OCM signal output, used to indicate running status and direction

External control signal: Start/stop signal, fast withdrawal and infusion signal

Power supply: AC 80 - 264V

Operating temperature: 0 to 40 ºC

Humidity: < 80%

Weight: < 4 Kg

Certificates: CE

ISPLab01

ISPLab02 Intelligent Dual-Channel Syringe Pump

ISPLab02 Intelligent Dual-Channel Syringe Pump

Dual-channel syringe pump with infusion/withdrawal mode, stainless steel body, and touch screen chromatic LCD easy to operate. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.

ISPLab02 Intelligent Dual-Channel Syringe Pump

Dimensions: 282 x 209 x 161 mm (D x W x H)

Working mode: Infusion, withdrawal, infusion/withdrawal, withdrawal/infusion

Channels: 2

Advance per step: 0.078 µm

Linear force: 8 - 20 Kgf, online adjust

Accuracy: Error ≤± 0,5 % (stroke >30% maximun stroke)

Flow rate: 0,001 µL/min – 127 mL/min

Syringe size: 10 µL – 140 mL

Comm. interface: RS232 + RS485 (Modbus protocol, RTU mode)

Max. linear rate: 132 mm/min

Min. linear rate: 5 µm/min

Max. step rate: 0.937 s/microstep

Min. step rate: 0.035 ms/microstep

Control mode: Touch screen and mechanical keypad

Display: Industrial grade 4.3" LCD color display

Output state: OCM signal output, used to indicate running status and direction

External control signal: Start/stop signal, fast withdrawal and infusion signal

Power supply: AC 80 - 264V

Operating temperature: 0 to 40 ºC

Humidity: < 80%

Weight: < 4 Kg

Certificates: CE

ISPLab02

SPLab01 Single-channel  Syringe Pump

SPLab01 Single-channel Syringe Pump

Single-channel syringe pump with infusion / withdrawal mode and stainless steel housing. Large colorful LCD screen display with friendly operation interface. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.

SPLab01 Single-channel Syringe Pump

Dimensions: 282 x 209 x 161 mm (D x W x H)

Working mode: Infusion, withdrawal, infusion/withdrawal, withdrawal/infusion, continuous, additional mode (infusion/withdrawal, then exclude bubble)

Channels: 1

Advance per step: 0.078 µm

Linear force: 16 Kgf

Accuracy: ≤± 0,5 %

Flow rate: 0,001 µL/min – 127 mL/min

Syringe size: 10 µL – 140 mL

Max. linear rate: 132 mm/min

Min. linear rate: 5 µm/min

Max. step rate: 0.937 s/microstep

Min. step rate: 0.035 ms/microstep

Control mode: Rotatory encoded switch and imported membrane keypad

Display: 320 x 240 TFT-LCD

Power off memory: Display the previous data parameter after power supply again

Power supply: AC 220V±10% (standard), AC 110V±10% (optional)

Operating temperature: 0 to 40 ºC

Humidity: < 80%

Weight: < 4 Kg

Certificates: CE

SPLab01

SPLab02 Dual-channel Syringe Pump

SPLab02 Dual-channel Syringe Pump

Dual-channel syringe pump with infusion / withdrawal mode, stainless steel housing and large colorful LCD screen display with friendly operation interface. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.

SPLab02 Dual-channel Syringe Pump

Dimensions: 282 x 236 x 158 mm (D x W x H)

Working mode: Infusion, withdrawal, infusion/withdrawal, withdrawal/infusion, continuous, additional mode (infusion/withdrawal, then exclude bubble)

Channels: 2

Advance per step: 0.078 µm

Linear force: 16 Kgf

Accuracy: ≤± 0,5 %

Flow rate: 0,001 µL/min – 127 mL/min

Syringe size: 10 µL – 140 mL

Max. linear rate: 132 mm/min

Min. linear rate: 5 µm/min

Max. step rate: 0.937 s/microstep

Min. step rate: 0.035 ms/microstep

Control mode: Rotatory encoded switch and imported membrane keypad

Display: 320 x 240 TFT-LCD

Power off memory: Display the previous data parameter after power supply again

Power supply: AC 220V±10% (standard), AC 110V±10% (optional)

Operating temperature: 0 to 40 ºC

Humidity: < 80%

Weight: < 4 Kg

Certificates: CE

SPLab02

Four-channels Syringe pump

SPLab04 Multi-channel (4) Syringe pump

Multi-syringe pump with infusion / withdrawal mode, stainless steel housing with 4-channels holding syringes up to 140 mL. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.

SPLab04 Multi-channel (4) Syringe pump

Dimensions: 278 x 221 x 175 mm (D x W x H)

Working mode: Infusion, withdrawal, infusion/withdrawal, withdrawal/infusion, continuous, additional mode (infusion/withdrawal, then exclude bubble)

Channels: 4

Advance per step: 0.078 µm

Linear force: 16 Kgf

Accuracy: ≤± 0,5 %

Flow rate: 0,001 µL/min – 127 mL/min

Syringe size: 10 µL – 140 mL

Max. linear rate: 132 mm/min

Min. linear rate: 5 µm/min

Max. step rate: 0.937 s/microstep

Min. step rate: 0.035 ms/microstep

Control mode: Rotatory encoded switch and imported membrane keypad

Display: 320 x 240 TFT-LCD

Power off memory: Display the previous data parameter after power supply again

Power supply: AC 220V±10% (standard), AC 110V±10% (optional)

Operating temperature: 0 to 40 ºC

Humidity: < 80%

Weight: < 4 Kg

Certificates: CE

SPLab04

SPLab06 Six-channels Syringe pump

SPLab06 Multi-channel (6) Syringe pump

Multi-syringe pump with infusion / withdrawal mode, stainless steel housing with 6-channels holding syringes up to 10 mL. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.

SPLab06 Multi-channel (6) Syringe pump

Dimensions: 280 x 288 x 175 mm (D x W x H)

Working mode: Infusion, withdrawal, infusion/withdrawal, withdrawal/infusion, continuous, additional mode (infusion/withdrawal, then exclude bubble)

Channels: 6

Advance per step: 0.078 µm

Linear force: 16 Kgf

Accuracy: ≤± 0,5 %

Flow rate: 0,001 µL/min – 22 mL/min

Syringe size: 10 µL – 10 mL

Max. linear rate: 132 mm/min

Min. linear rate: 5 µm/min

Max. step rate: 0.937 s/microstep

Min. step rate: 0.035 ms/microstep

Control mode: Rotatory encoded switch and imported membrane keypad

Display: 320 x 240 TFT-LCD

Power off memory: Display the previous data parameter after power supply again

Power supply: AC 220V±10% (standard), AC 110V±10% (optional)

Operating temperature: 0 to 40 ºC

Humidity: < 80%

Weight: < 4 Kg

Certificates: CE

SPLab06

SPLab08 Eight-channels Syringe pump

SPLab08 Multi-channel (8) Syringe pump

Multi-syringe pump with infusion / withdrawal mode, stainless steel housing with 8-channels holding syringes up to 10 mL. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.

SPLab08 Multi-channel (8) Syringe pump

Dimensions: 280 x 288 x 175 mm (D x W x H)

Working mode: Infusion, withdrawal, infusion/withdrawal, withdrawal/infusion, continuous, additional mode (infusion/withdrawal, then exclude bubble)

Channels: 8

Advance per step: 0.078 µm

Linear force: 16 Kgf

Accuracy: ≤± 0,5 %

Flow rate: 0,001 µL/min – 22 mL/min

Syringe size: 10 µL – 10 mL

Max. linear rate: 132 mm/min

Min. linear rate: 5 µm/min

Max. step rate: 0.937 s/microstep

Min. step rate: 0.035 ms/microstep

Control mode: Rotatory encoded switch and imported membrane keypad

Display: 320 x 240 TFT-LCD

Power off memory: Display the previous data parameter after power supply again

Power supply: AC 220V±10% (standard), AC 110V±10% (optional)

Operating temperature: 0 to 40 ºC

Humidity: < 80%

Weight: < 4 Kg

Certificates: CE

SPLab08

SPLab10 Ten-channels Syringe pump

SPLab10 Multi-channel (10) Syringe pump

Multi-syringe pump with infusion / withdrawal mode, stainless steel housing with 10-channels holding syringes up to 10 mL. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.

SPLab10 Multi-channel (10) Syringe pump

Dimensions: 280 x 288 x 175 mm (D x W x H)

Working mode: Infusion, withdrawal, infusion/withdrawal, withdrawal/infusion, continuous, additional mode (infusion/withdrawal, then exclude bubble)

Channels: 10

Advance per step: 0.078 µm

Linear force: 16 Kgf

Accuracy: ≤± 0,5 %

Flow rate: 0,001 µL/min – 22 mL/min

Syringe size: 10 µL – 10 mL

Max. linear rate: 132 mm/min

Min. linear rate: 5 µm/min

Max. step rate: 0.937 s/microstep

Min. step rate: 0.035 ms/microstep

Control mode: Rotatory encoded switch and imported membrane keypad

Display: 320 x 240 TFT-LCD

Power off memory: Display the previous data parameter after power supply again

Power supply: AC 220V±10% (standard), AC 110V±10% (optional)

Operating temperature: 0 to 40 ºC

Humidity: < 80%

Weight: < 4 Kg

Certificates: CE

SPLab10

SPLab12 Twelve-channels Syringe pump

SPLab12 Multi-channel (12) Syringe pump

Multi-syringe pump with infusion / withdrawal mode, stainless steel housing with 12-channels holding syringes up to 10 mL. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.

SPLab12 Multi-channel (12) Syringe pump

Dimensions: 280 x 288 x 175 mm (D x W x H)

Working mode: Infusion, withdrawal, infusion/withdrawal, withdrawal/infusion, continuous, additional mode (infusion/withdrawal, then exclude bubble)

Channels: 12

Advance per step: 0.078 µm

Linear force: 16 Kgf

Accuracy: ≤± 0,5 %

Flow rate: 0,001 µL/min – 22 mL/min

Syringe size: 10 µL – 10 mL

Max. linear rate: 132 mm/min

Min. linear rate: 5 µm/min

Max. step rate: 0.937 s/microstep

Min. step rate: 0.035 ms/microstep

Control mode: Rotatory encoded switch and imported membrane keypad

Display: 320 x 240 TFT-LCD

Power off memory: Display the previous data parameter after power supply again

Power supply: AC 220V±10% (standard), AC 110V±10% (optional)

Operating temperature: 0 to 40 ºC

Humidity: < 80%

Weight: < 4 Kg

Certificates: CE

SPLab12

Lab2015 Single-channel Peristaltic Pump

Lab2015 Flow Rate Single-channel Peristaltic Pump

Single-channel peristaltic pump with 4.3” LCD touch screen display. Speed range is 0.1 - 100 rpm and flow rate range is 0.000166 – 32 mL/min. Support RS232 and RS485 interface. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.

Lab2015 Flow Rate Single-channel Peristaltic Pump

Dimensions: 261 x 157 x 237 mm (L x W x H)

Channels: 1

Motor type: Step motor

Flow rate: 0.17 µL/min – 32 mL/min

Comm. interface: RS232/RS485 support MODBUS protocol (RTU mode)

Output interface: Output motor working status (Open-collector output)

Speed: 0.1 - 100 rpm

Speed precision: 0.01 rpm

Flow rate resolution: 0.01 µL

Flow rate accuracy: <± 0,5 %

Back suction angle: 0 - 360º

Control mode: Touch screen and mechanical keypad

Display: 4.3” true color LCD screen

External speed control signal: 0-5 V, 0-10 V, 4-20 mA for option

Start/stop, direction signal: Passive switch signal, such as foot pedal switch. Active switch signal: 5V, 12V and 24V for option

Rollers (materials): 10 (stainless steel)

Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm

Max. pressure: 0.1 – 0.27 MPa (depending on wall thickness tubing)

Power supply: AC 220V±10% (standard), AC 110V±10% (optional)

Power consumption: < 50W

Operating temperature: 0 to 40 ºC

Humidity: < 80%

Weight: 4.4 Kg

Certificates: CE

Lab2015-MC1

Lab2015 Dual-channel Peristaltic Pump

Lab2015 Flow Rate Dual-channel Peristaltic Pump

Dual-channel peristaltic pump with 4.3” LCD touch screen display. Speed range is 0.1 - 100 rpm and flow rate range is 0.000166 – 32 mL/min. Support RS232 and RS485 interface. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.

Lab2015 Flow Rate Dual-channel Peristaltic Pump

Dimensions: 261 x 157 x 237 mm (L x W x H)

Channels: 2

Motor type: Step motor

Flow rate: 0.17 µL/min – 32 mL/min

Comm. interface: RS232/RS485 support MODBUS protocol (RTU mode)

Output interface: Output motor working status (Open-collector output)

Speed: 0.1 - 100 rpm

Speed precision: 0.01 rpm

Flow rate resolution: 0.01 µL

Flow rate accuracy: <± 0,5 %

Back suction angle: 0 - 360º

Control mode: Touch screen and mechanical keypad

Display: 4.3” true color LCD screen

External speed control signal: 0-5 V, 0-10 V, 4-20 mA for option

Start/stop, direction signal: Passive switch signal, such as foot pedal switch. Active switch signal: 5V, 12V and 24V for option

Rollers (materials): 10 (stainless steel)

Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm

Max. pressure: 0.1 – 0.27 MPa (depending on wall thickness tubing)

Power supply: AC 220V±10% (standard), AC 110V±10% (optional)

Power consumption: < 50W

Operating temperature: 0 to 40 ºC

Humidity: < 80%

Weight: 4.4 Kg

Certificates: CE

Lab2015-MC2

Lab2015 Flow Rate Four-channels Peristaltic Pump

Lab2015 Flow Rate Multi-channel (4) Peristaltic Pump

4-channels peristaltic pump with 4.3” LCD touch screen display. Speed range is 0.1 - 100 rpm and flow rate range is 0.000166 – 32 mL/min. Support RS232 and RS485 interface. Compatible with AIO-Cell, Flow-cell and TL add-ons, and thin-film electrodes.

Lab2015 Flow Rate Multi-channel (4) Peristaltic Pump

Dimensions: 261 x 157 x 237 mm (L x W x H)

Channels: 4

Motor type: Step motor

Flow rate: 0.17 µL/min – 32 mL/min

Comm. interface: RS232/RS485 support MODBUS protocol (RTU mode)

Output interface: Output motor working status (Open-collector output)

Speed: 0.1 - 100 rpm

Speed precision: 0.01 rpm

Flow rate resolution: 0.01 µL

Flow rate accuracy: <± 0,5 %

Back suction angle: 0 - 360º

Control mode: Touch screen and mechanical keypad

Display: 4.3” true color LCD screen

External speed control signal: 0-5 V, 0-10 V, 4-20 mA for option

Start/stop, direction signal: Passive switch signal, such as foot pedal switch. Active switch signal: 5V, 12V and 24V for option

Rollers (materials): 10 (stainless steel)

Tubing: ID < 3.17 mm Wall thickness 0.8-1 mm

Max. pressure: 0.1 – 0.27 MPa (depending on wall thickness tubing)

Power supply: AC 220V±10% (standard), AC 110V±10% (optional)

Power consumption: < 50W

Operating temperature: 0 to 40 ºC

Humidity: < 80%

Weight: 4.4 Kg

Certificates: CE

Lab2015-MC4

35 Products. View all

Returns

All the information that you should know about our returns policy...

More information

Contact

Contact us to solve your doubts or answer your questions. We can help you!

More information

Delivery

We ship the products under strict security measures, ensuring their protection...

More information

subscribe to our monthly newsletter